Owner's Manual

17
En
You can change the dynamic range to make sounds easy to hear at a low volume.
1 Turn off the unit.
2 Press the key for the desired mode for more than 5 seconds.
The unit turns on with the selected setting.
Three settings are available (see below).
You can confirm the setting status by the lights of the indicator, when the unit is turned
on.
NOTE
• Normal is set as default.
Follow the procedure below to initialize the unit. When the unit does not operate properly
for any reason, initialization may solve the problem.
1 Turn off the unit.
2 Hold down (power) on the front panel of the unit for more than 3
seconds.
Making sound easy to listen at low volume
Setting Description Indicator
Normal Automatically adjusts the dynamic range
based on the volume level of the source.
Lights up in green
Standard Compresses the dynamic range to suit a
living room environment, etc.
Lights up in orange
Maximum Does not compress the dynamic range.
Lights up in red
Returns to Normal
Sets to Standard
Sets to Maximum
Initializing the settings of the unit
Flash (initialized)