UAB Digital Sound Projector Quick Reference Guide For more detailed information, refer to the Owner’s Manual on the CD-ROM. Caution: Do not attempt to play this CD-ROM in an audio player.
IMPORTANT SAFETY INSTRUCTIONS 11 12 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 13 14 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC INFORMATION (for US customers) NOTICE 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 4 En To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
■ Notes on remote controls and batteries • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following conditions: – places of high humidity, such as near a bath – places of high temperatures, such as near a heater or stove – places of extremely low temperatures – dusty places • Insert the battery according to the polarity markings (+ and -).
About this Quick Reference Guide The Quick Reference Guide provides instructions for connecting a TV and BD/DVD player to the unit, applying settings, and playing content. For more information on operations, refer to the Owner’s Manual in the supplied CD-ROM. Supplied accessories Before connecting, make sure you have received all of the following items. Read the safety instructions described in this booklet before using the unit.
Preparing remote control Before installing batteries or using the remote control, be sure to read battery and remote control precautions in this booklet. Installing the batteries Operation range Peel off the protection sheet before use.
1 2 3 4 a Installation Place the unit on a flat surface. When installing this unit on a rack behind which there is limited space, for example, it may be easier to connect external devices to this unit first. See page 10 for information regarding the connection of external devices. Notes • Be sure to install this unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.
1 2 3 4 ❑ Unit installation position and surround sound effects Raising the antenna The unit achieves surround sound by reflecting sound beams off walls. Raise the antenna on the rear panel of the unit when connecting a wireless router (access point) to use a network. Hold the base of the antenna while raising it to its upright position. Effective surround effect may not be achieved in the following environment. • Sound beams are blocked by obstacles such as furniture.
1 2 3 4 b Connections Connecting a TV and BD/DVD player For the cable connection, follow the procedure below. See page 16 in the Owner’s Manual when connecting other playback devices such as a game console. TV 1 HDMI cable (optional) The digital audio/video signals from the BD/DVD player are input to this unit. Video signals Audio signals HDMI INPUT 2 1 OPTICAL OUTPUT 3 2 HDMI cable (optional) Digital video from the BD/DVD player is displayed on the TV.
1 2 3 4 Turning on the unit 1 Press the z key. Connecting the unit to a wireless network When the unit is turned on for the first time after purchase, the indicator on the front panel will flash slowly. The screen below will be displayed on the TV when the TV is turned on. 1 Press the ENTER key. The screen below is displayed. Share Share Y ( n u l Flashes slowly ENTER RETURN o W e s a u i t i t w n e c F o g r an i) rk a .
1 2 3 4 4 Select the network (access point) of which you want to share the settings with the unit. c Surround sound effect for the installation position iOS (an example of English version) Tap here to start setup The network currently selected The name of the unit The surround sound is achieved by reflecting the sound beams off walls as shown in the illustration below. For optimum surround effect, turn on the unit and select the POSITION key according to the installation position of the unit.
1 2 3 4 d Playback Enjoying TV 1 2 5 The number of lighted indicators increases when the volume is turned up, and decreases when the volume is turned down. Press the TV key. • When audio is output from the TV speaker, set TV’s audio output to any option other than TV. See the instructions manual of TV for more information. TV • HDMI control function You can use the TV remote control to operate this unit if your TV supports the HDMI control function. See page 20 in the Owner’s Manual.
AVEG1A1102C Important Notice:Guarantee Information for customers in EEA* and Switzerland English For detailed guarantee information about this Yamaha product, and Pan-EEA* and Switzerland warranty service, please either visit the website address below (Printable file is available at our website) or contact the Yamaha representative office for your country. *EEA:European Economic Area http://europe.yamaha.