Manual

APPENDIX ➤ Pairing the center unit and subwoofer En 105
• Be sure that “Bass Out” of “Subwoofer” in the setup menu is set to “Wireless” (p. 76).
Pairing is the process of establishing a wireless connection between the center unit and subwoofer.
When the center unit is turned on for the first time, the center unit and subwoofer are usually paired automatically. If a problem occurs (e.g.,
the STATUS indicator on the subwoofer does not glow green), follow the instructions below to pair the center unit and subwoofer manually.
1
Turn on the center unit.
2
Press the SETUP ( ) key.
3
Use the S/T keys to select “Beam”, and then press
the ENTER key.
4
Use the S/T keys to select “Subwoofer”, and then
press the ENTER key.
5
Use the S/T keys to select “Pairing”, and then
press the ENTER key.
6
Use an object with a fine point, such as a pin, to
hold down the SUBWOOFER PAIRING button on the
subwoofer for more than 3 seconds.
The subwoofer’s STATUS indicator will rapidly blink green.
Once pairing has been completed and the link between the
center unit and subwoofer has been re-established, the
STATUS indicator will glow green. “Completed” appears on
the TV screen.
• If “Not connected” is displayed on the TV screen or the subwoofer’s STATUS
indicator does not glow green after 30 seconds have passed, repeat the
procedure from step 2. If the problem persists, refer to “No sound is coming from
the subwoofer.” in “Troubleshooting” (p. 96).
Pairing the center unit and subwoofer
SYSTEM
CONNECTOR
SUBWOOFER
PAIRING
INPUTSTATUS
SUBWOOFER
PAIRING
STATUS
Rear panel of the subwoofer
/
ENTER
SETUP ( )