Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Preparations
- Playback
- Basic operation for playback
- Enjoying sound based on your preference
- Playback with surround sound
- Enjoying three-dimensional surround sound (CINEMA DSP)
- 2-channel playback (stereo playback mode)
- Delivering sound to a specified location (target playback mode)
- Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer)
- Clear playback of human voices (CLEAR VOICE)
- Adjusting volume for each channel
- Adjusting tones
- Using useful features
- Wireless playback of audio via Bluetooth connection
- Networks
- Settings
- Troubleshooting
- Messages
- When surround effect is not enough
- Pairing the center unit and subwoofer
- Basic knowledge of surround sound
- Glossary
- Specs
- Index
- Quick Reference Guide
- MusicCast Setup Guide
- Supplement for Pandora
- Supplement for Rhapsody
- Supplement for Spotify
- MusicCast
- Mounting Template
- Scan of CD-ROM
- Warranty
NETWORKS ➤ Network functions and the MusicCast CONTROLLER app En 53
Using connection methods other than the MusicCast CONTROLLER app (wireless network)
Use the setup menu on the unit to connect to a wireless network
without using the MusicCast CONTROLLER app.
• Sharing the iOS device setting (p. 53)
• Using the WPS push button configuration (p. 54)
• Searching for a wireless router (access point) (p. 55)
• Setting up the wireless connection manually (p. 57)
• Using the WPS PIN code (p. 59)
• Once the unit has been connected to a wireless network using any of the methods
described above, network settings will change when connection to a wireless
network is established with the MusicCast CONTROLLER app.
• AirPlay is the only network function that can be used without the MusicCast
CONTROLLER app.
You can easily setup a wireless connection by applying the
connection settings on iOS devices (such as an
iPhone).
Before proceeding, confirm that your iOS device is connected to a
wireless router (access point).
• You need iOS device with iOS 7 or later.
• The connection settings on iOS devices cannot be applied to the unit to establish
a wireless connection if your wireless router (access point) uses WEP encryption.
See “Searching for a wireless router (access point)” (p. 55) to establish a
connection.
1
Press the z key to turn on this unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 30).
3
Press the SETUP ( ) key.
The setup menu is displayed on the TV screen.
4
Use the S/T keys to select “Network”, and press
the ENTER key.
5
Use the S/T keys to select “Network Connection”,
and press the ENTER key.
6
Use the S/T keys to select “Wireless (Wi-Fi)”, and
press the ENTER key.
7
Use the S/T keys to select “Share Wi-Fi Settings
(iOS)”, and press the ENTER key.
Sharing the iOS device setting
/
ENTER
SETUP ( )
z