Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Preparations
- Playback
- Basic operation for playback
- Enjoying sound based on your preference
- Playback with surround sound
- Enjoying three-dimensional surround sound (CINEMA DSP)
- 2-channel playback (stereo playback mode)
- Delivering sound to a specified location (target playback mode)
- Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer)
- Clear playback of human voices (CLEAR VOICE)
- Adjusting volume for each channel
- Adjusting tones
- Using useful features
- Wireless playback of audio via Bluetooth connection
- Networks
- Settings
- Troubleshooting
- Messages
- When surround effect is not enough
- Pairing the center unit and subwoofer
- Basic knowledge of surround sound
- Glossary
- Specs
- Index
- Quick Reference Guide
- MusicCast Setup Guide
- Supplement for Pandora
- Supplement for Rhapsody
- Supplement for Spotify
- MusicCast
- Mounting Template
- Scan of CD-ROM
- Warranty
SETTINGS ➤ Setup menu En 80
HDMI
Use to configure the settings related to HDMI signals and the HDMI control function.
Turn HDMI control (p. 37) on or off.
Settings
• Set the HDMI control function to “On” when a TV that supports audio return channel (ARC) is used (p. 24),
or when using the HDMI signal pass-through function (p. 25).
This setting can be configured only when “HDMI Control” is set to “Off”.
Use to select a device to play back HDMI audio signals.
Settings
• When “HDMI Control” is set to “On”, select the audio output device based on the settings configured for the
TV connected to this unit.
• HDMI video signals input to one of the HDMI IN jacks of this unit are always output from the HDMI OUT
(ARC) jack of this unit.
If your TV is not ARC compatible (or if the ARC feature has been disabled), TV audio is
input via the TV (optical digital) input jack (default). This unit’s input source can be
changed to the AUX2 (coaxial digital) input jack or AUX1 (analog) input jacks.
Settings
Optical [TV] (default), Analog [AUX1], Coaxial [AUX2]
• If this unit’s input source is switched to “Coaxial [AUX2]”:
Audio is input from the device (TV) connected to the AUX2 (coaxial digital) input jack on this unit when the
TV key is pressed. Audio is input from the device connected to the TV (optical digital) input jack on this unit
when the AUX2 key is pressed.
• If this unit’s input source is switched to “Analog [AUX1]”:
Audio is input from the device (TV) connected to the AUX1 (analog) input jacks on this unit when the TV key
is pressed. Audio is input from the device connected to the TV (optical digital) input jack on this unit when
the AUX1 key is pressed.
HDMI Control
Setup Menu
➜
HDMI
➜
HDMI Control
Off
Disable the control function. The standby power consumption of this unit
decreases.
On (default) Enable the control function.
HDMI Audio Out
Setup Menu
➜
HDMI
➜
HDMI Audio Out
AMP (default) Play HDMI audio input signal from the unit.
TV
Play HDMI audio input signal from the TV connected to the HDMI OUT (ARC)
jack on the unit.
TV Input
Setup Menu
➜
HDMI
➜
TV Input