Quick Start Guide

ManualsBrandsYamaha ManualsOtherYSP-3300

This Quick Reference Guide explains steps to connect external components to this unit and start playback. For detailed operation,

refer to the “Owner’s Manual” in the supplied CD-ROM.

Check that you received all of the supplied accessories referring to “Supplied accessories” of “Safety and Accessory Information”

(separate booklet). For instructions on how to operate or set the external components, refer to the owner’s manual supplied with each

component.

In this guide, the YSP-CU4300 center unit is used for illustrative purposes.

Installation Connection Settings Playback

Installing YSP-4300/YSP-3300

Quick Reference Guide

English

UCABGLVFH

Center unit

• Install the center unit in the center of the left and right walls.

• Place the center unit on a TV stand in front of the TV.

Use the TV Remote Repeater function if the center unit

obstructs the remote control sensor on the TV (see page 12 of

the Owner's Manual).

Increase the height of the center unit if the TV stand is too high

for center unit installation (see page 12 of the Owner's Manual).

• The listening position (such as sofa, etc.) should be located at

the front of the center unit.

• The distance between the listening position and the center unit

should be more than 1.8 m (6 ft).

• This unit can be mounted on a wall using WALL MOUNT

BRACKET SPM-K20 (option). Refer to the SPM-K20 Install

Manual and SPM-K20 Information for YSP-CU4300/

YSP-CU3300.

Center unit Subwoofer

Subwoofer

• To prevent sound reflecting off of walls, angle the subwoofer

slightly toward the center of the room.

• When installing the subwoofer on a rack, be sure the rack is

strong enough to support the subwoofer and that it leaves

sufficient space for heat discharge.

• The center unit and subwoofer communicate wirelessly.

Subwoofer performance may be affected if the subwoofer is

placed on a metal rack, or if there is a metal plate between the

subwoofer and the center unit.

• The subwoofer can also be placed on its side (see page 13 of

the Owner's Manual).

This unit creates surround effects by reflecting sound beams off

the walls of your listening room. The arrows in the diagrams on the

right indicate the images of paths of 5-channel sound beams. To

achieve desired surround sound effects, install this unit where

there are no objects such as furniture obstructing the path of sound

beams.

1 Front left channel 4 Surround left channel

2 Center channel 5 Surround right channel

3 Front right channel

Parallel installation Corner installation

Objects,

such as

furniture

Objects, such as furniture

40° to 50°

Installation Connection Settings Playback

Connection

When external devices such as a TV, Blu-ray disc player, and/or game console are connected, audio and video signals are transmitted

as shown below.

• Do not connect the power cable until all connections are completed.

• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack.

■ Connecting a TV and a Blu-ray disc player

For the cable connection, follow the procedure below.

Audio

connection

Video

connection

Audio and video

connection

This unit: Plays audio from TV broadcasts, Blu-ray discs, etc.

Game console

(HDMI compatible)

Satellite and cable TV tuner

(not HDMI compatible)

TV: Plays video from TV broadcasts,

Blu-ray disc player, etc.

Blu-ray disc player

HDMI cable

Optical cable

Use to connect a TV

that does not support

audio return channel

(ARC) to this unit.

Composite video cable

Optical cable

HDMI cable

HDMI cable (optional)

Input the digital audio/video signals of

the Blu-ray disc player to this unit.

HDMI cable (optional)

The digital video of the Blu-ray disc

player is reflected on TV.

Optical cable (supplied)

Play back digital sounds of TV on this

unit. y

HDMI INPUT

123

HDMI

OUTPUT

OPTICAL

OUTPUT

Blu-ray disc player

1. Remove the cap 2. Check the direction

of the plug

Video signals

Audio signals

To AC wall outlet

U.S.A., Canada,

Europe, Russia, and

China models only

■ Connecting a game console or satellite/cable TV tuner

Audio return channel (ARC) supported TV

• Connect an HDMI cable to the audio return channel supported jack (the jack with “ARC” indicated) on TV. In this case, you do not need

to connect an optical cable.

• Activate the HDMI control function of this unit so as to activate the audio return channel (ARC) (refer to “HDMI setup” in the Owner's

Manual).

What is audio return channel (ARC)?

A function transmits digital audio signal output from TV to this unit through an HDMI cable. By this function, an optical cable to connect TV

and this unit is not needed.

yTips

External device (example) Connecting cable

HDMI compatible

1 Satellite/cable TV tuner HDMI cable (optional)

2 Game console HDMI cable (optional)

3 Game console HDMI cable (optional)

not HDMI compatible

4 Satellite/cable TV tuner

Optical cable (supplied)

Composite video cable (optional)

5 Game console

RCA stereo cable (optional)

Composite video cable (optional)

HDMI

OUTPUT

HDMI

OUTPUT

HDMI

OUTPUT

VIDEO

INPUT

VIDEO

INPUT

OPTICAL

OUTPUT

ANALOG

OUTPUT

VIDEO

OUTPUT

VIDEO

OUTPUT

Video signals

Audio signals

To AC wall outlet

To connect a device with an AUX output jack, connect its AUX output jack to the AUX INPUT DIGITAL (coaxial) jack on this unit via a

commercial coaxial digital audio cable.

yTip

U.S.A., Canada,

Europe, Russia, and

China models only

■ Connecting the FM antenna (YSP-4300 only)

Connect the supplied FM antenna via the FM ANTENNA jack.

■ Connecting the wireless subwoofer

■ Preparing remote control

Install the batteries Operation range

FM antenna

LINK

Group ID switches

LINK indicator

Blinks: Establishing

connection

Lights: Connection

established

To AC wall outlet

To connect the supplied subwoofer to the center unit wirelessly, the same

group ID must be assigned to the center unit and subwoofer. The default

group ID for both components is A1, enabling wireless connection by

simply plugging the subwoofer's power cable into an electrical outlet.

When using the transmitter (YIT-W12TX)*, the same group ID must be

assigned to the center unit and subwoofer. The default group ID of

YIT-W12TX is A1.

The LINK indicator lights when the subwoofer is on and the subwoofer

and center unit are connected wirelessly.

When the center unit enters standby mode, the subwoofer and LINK

indicator turn off.

* For details of YIT-W12TX, refer to “Safety and Accessory Information”

(separate booklet).

Battery × 2

(AAA, R03, UM-4)

Pull up on the latch to

release the cover

Insert the

protrusions into

the slots and

close the cover

Within 6 m (20 ft)

Summary of content (2 pages)

PAGE 1
Installation Connection Settings Playback UCABGLVFH Connection When external devices such as a TV, Blu-ray disc player, and/or game console are connected, audio and video signals are transmitted as shown below. Audio connection ■ Connecting the FM antenna (YSP-4300 only) yTips Connect the supplied FM antenna via the FM ANTENNA jack. Audio return channel (ARC) supported TV • Connect an HDMI cable to the audio return channel supported jack (the jack with “ARC” indicated) on TV.
PAGE 2
Installation Connection Settings Playback 5. For accurate measurement, turn off air conditioner or other devices that make noises. Carrying out AUTO SETUP for appropriate surround effects Follow the instructions below and then leave the room. If you remain in the room, you may obstruct the beam, or the microphone may pick up any sounds you make, possibly resulting in improper configuration of settings. When leaving the room, bring this Quick Reference Guide with you.