manual
Table Of Contents
- English
- INTRODUCTION
- PREPARATION
- Installation
- Connections
- Before connecting components
- Connections using HDMI cables
- Connecting a TV
- Connecting a DVD player/recorder
- Connecting a digital satellite tuner or a cable TV tuner
- Connecting a digital airwave tuner
- Connecting a portable audio player
- Connecting other external components
- Connecting a subwoofer
- Connecting the FM antenna
- About the RS-232C/IR-OUT/IR IN terminals
- Connecting the AC power supply cable
- SETUP
- BASIC OPERATION
- Playback
- FM tuning
- Enjoying surround sound
- Enjoying stereo sound
- Playing back sound clearly (My Beam)
- Using sound field programs
- Using the music enhancer
- Using the volume mode (Night listening enhancer/TV volume equal mode)
- Using the sleep timer
- Displaying the input source information
- Using the HDMI control feature
- ADVANCED OPERATION
- ADDITIONAL INFORMATION
- Español
- INTRODUCCION
- PREPARACION
- Instalación
- Conexiones
- Antes de conectar componentes
- Conexiones usando cables HDMI
- Conexión de un TV
- Conexión de un reproductor/grabadora DVD
- Conexión de un sintonizador de satélite digital o un sintonizador de TV por cable
- Conexión de un sintonizador digital de ondas del aire
- Conexión de un reproductor de audio portátil
- Conexión de otros componentes externos
- Conexión de un altavoz de subgraves
- Conexión de la antena de FM
- Acerca de los terminales RS-232C/IR-OUT/IR IN
- Conexión del cable de alimentación de CA
- INSTALACION
- FUNCIONAMIENTO BASICO
- Reproducción
- Sintonización de FM
- Disfrute del sonido surround
- Disfrute del sonido estéreo
- Reproducción clara del sonido (My Beam)
- Uso de programas de campos sonoros
- Uso del realzador de música
- Utilización del modo de volumen (Modo de escucha nocturna/Modo de igualación del volumen del TV)
- Utilización del temporizador para dormir
- Visualización de información de la fuente de entrada
- Utilización de la función de control HDMI
- FUNCIONAMIENTO AVANZADO
- INFORMACION ADICIONAL
- 中文
- QUICK REFERENCE GUIDE
111 En
Troubleshooting
ADDITIONAL
INFORMATION
English
■ Remote control
■ HDMI
Problem Cause Remedy
See
page
The remote control does not
work and/or function
properly.
Wrong distance or angle. The remote control functions within a
maximum range of 6 m (20 ft) and no more
than 45 degrees off-axis from the front
panel.
32
Direct sunlight or lighting (from an inverter
type of fluorescent lamp, etc.) is striking the
remote control sensor of this unit.
Reposition this unit.
—
The batteries are weak. Replace all batteries.
32
Cannot operate external
components with the remote
control of this unit.
The external component you want to operate
is not selected as the input source.
Press INPUT on the front panel or the input
selector buttons on the remote control to
select the external component you want to
operate.
47
The remote control code was not correctly
set.
Set the remote control code correctly or try
another code for the same manufacturer
using the “List of remote control codes” at
the end of this manual.
103
Even if the remote control code is correctly
set, there are some models that do not
respond to the remote control.
Use the remote control supplied with the
external component.
—
The cursor buttons do not
work during SET MENU
operation.
The operation mode selector was
unwantedly set to TV/AV.
Set the operation mode selector to YSP.
—
Cannot use the My Beam
auto-adjust function.
Wrong distance or angle. The remote control functions within a
maximum range of 6 m (20 ft) and no more
than 45 degrees off-axis from the front
panel.
32
Error message Cause Remedy
See
page
Device Error The number of the connected HDMI
components exceeds the limit.
Reduce the number of the connected HDMI
components.
—
HDCP Error HDCP authentication failed. Check that the connected HDMI
components support the HDCP copy
protection standards.
—
Out of Resolution The resolution of the HDMI output signals
exceeds the limit allowed by your TV.
Adjust UP-SCALING.
87