manual
Table Of Contents
- English
- INTRODUCTION
- PREPARATION
- Installation
- Connections
- Before connecting components
- Connections using HDMI cables
- Connecting a TV
- Connecting a DVD player/recorder
- Connecting a digital satellite tuner or a cable TV tuner
- Connecting a digital airwave tuner
- Connecting a portable audio player
- Connecting other external components
- Connecting a subwoofer
- Connecting the FM antenna
- About the RS-232C/IR-OUT/IR IN terminals
- Connecting the AC power supply cable
- SETUP
- BASIC OPERATION
- Playback
- FM tuning
- Enjoying surround sound
- Enjoying stereo sound
- Playing back sound clearly (My Beam)
- Using sound field programs
- Using the music enhancer
- Using the volume mode (Night listening enhancer/TV volume equal mode)
- Using the sleep timer
- Displaying the input source information
- Using the HDMI control feature
- ADVANCED OPERATION
- ADDITIONAL INFORMATION
- Español
- INTRODUCCION
- PREPARACION
- Instalación
- Conexiones
- Antes de conectar componentes
- Conexiones usando cables HDMI
- Conexión de un TV
- Conexión de un reproductor/grabadora DVD
- Conexión de un sintonizador de satélite digital o un sintonizador de TV por cable
- Conexión de un sintonizador digital de ondas del aire
- Conexión de un reproductor de audio portátil
- Conexión de otros componentes externos
- Conexión de un altavoz de subgraves
- Conexión de la antena de FM
- Acerca de los terminales RS-232C/IR-OUT/IR IN
- Conexión del cable de alimentación de CA
- INSTALACION
- FUNCIONAMIENTO BASICO
- Reproducción
- Sintonización de FM
- Disfrute del sonido surround
- Disfrute del sonido estéreo
- Reproducción clara del sonido (My Beam)
- Uso de programas de campos sonoros
- Uso del realzador de música
- Utilización del modo de volumen (Modo de escucha nocturna/Modo de igualación del volumen del TV)
- Utilización del temporizador para dormir
- Visualización de información de la fuente de entrada
- Utilización de la función de control HDMI
- FUNCIONAMIENTO AVANZADO
- INFORMACION ADICIONAL
- 中文
- QUICK REFERENCE GUIDE
21 En
Connections
PREPARATION
English
■ Cables used for connections
HDMI cable
Audio pin cable (supplied)
Optical cable (supplied)
Digital audio pin cable (supplied)
3.5 mm stereo mini plug cable
Subwoofer pin cable
OSD video pin cable (supplied) / Video pin cable
Component video pin cable
■ Notes on connecting the optical cable
• Pull out the cap before connecting the optical cable.
When you are not using the optical cable, be sure to put the cap
back in place.
• When inserting the cable into the optical digital jack, make sure
the direction is correct.
■ Affixing cables
To prevent cables from becoming unplugged, place the supplied cable
clamp with the open side facing upward, attach it to the rear panel of
this unit in a suitable position, and then affix cables in the cable clamp.
■ Information on HDMI™
Audio signals
•
When CPPM copy-protected DVD audio is played back, video and
audio signals may not be output depending on the type of DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or
DVI components.
y
• We recommend that you use an HDMI cable shorter than 5 m
(16 ft) with the HDMI logo printed on it.
• Use a conversion cable (HDMI jack
↔ DVI-D jack) to connect
this unit to other DVI components.
■ Priority order for audio input signals
When multiple types of audio signals are simultaneously
being input from a single source component, this unit
plays back the audio signals in the following priority
order: HDMI → Digital → Analog
As default settings, the following input jacks are assigned
to the corresponding input sources:
Before connecting components
Audio/Video
Audio
Video
A
(White)
(Red)
(White)
(Red)
(Orange)(Orange)
5
(Yellow)(Yellow)
(Green)
(Green)
(Blue)
(Red)
(Blue)
(Red)
Cap
Input source Audio signal type
DVD video Dolby Digital, DTS, PCM
DVD audio
2-channel stereo
(up to 96 kHz/24 bit)
Blu-ray Disc
HD DVD
Dolby Digital, DTS, PCM
Notes
Input
jack
Input
Source
HDMI Digital Analog
TV/STB
DVD
AUX 1
AUX 2
AUX 3
Optical cable
Attach to this unit