manual
Table Of Contents
- English
- INTRODUCTION
- PREPARATION
- Installation
- Connections
- Before connecting components
- Connections using HDMI cables
- Connecting a TV
- Connecting a DVD player/recorder
- Connecting a digital satellite tuner or a cable TV tuner
- Connecting a digital airwave tuner
- Connecting a portable audio player
- Connecting other external components
- Connecting a subwoofer
- Connecting the FM antenna
- About the RS-232C/IR-OUT/IR IN terminals
- Connecting the AC power supply cable
- SETUP
- BASIC OPERATION
- Playback
- FM tuning
- Enjoying surround sound
- Enjoying stereo sound
- Playing back sound clearly (My Beam)
- Using sound field programs
- Using the music enhancer
- Using the volume mode (Night listening enhancer/TV volume equal mode)
- Using the sleep timer
- Displaying the input source information
- Using the HDMI control feature
- ADVANCED OPERATION
- ADDITIONAL INFORMATION
- Español
- INTRODUCCION
- PREPARACION
- Instalación
- Conexiones
- Antes de conectar componentes
- Conexiones usando cables HDMI
- Conexión de un TV
- Conexión de un reproductor/grabadora DVD
- Conexión de un sintonizador de satélite digital o un sintonizador de TV por cable
- Conexión de un sintonizador digital de ondas del aire
- Conexión de un reproductor de audio portátil
- Conexión de otros componentes externos
- Conexión de un altavoz de subgraves
- Conexión de la antena de FM
- Acerca de los terminales RS-232C/IR-OUT/IR IN
- Conexión del cable de alimentación de CA
- INSTALACION
- FUNCIONAMIENTO BASICO
- Reproducción
- Sintonización de FM
- Disfrute del sonido surround
- Disfrute del sonido estéreo
- Reproducción clara del sonido (My Beam)
- Uso de programas de campos sonoros
- Uso del realzador de música
- Utilización del modo de volumen (Modo de escucha nocturna/Modo de igualación del volumen del TV)
- Utilización del temporizador para dormir
- Visualización de información de la fuente de entrada
- Utilización de la función de control HDMI
- FUNCIONAMIENTO AVANZADO
- INFORMACION ADICIONAL
- 中文
- QUICK REFERENCE GUIDE
80 En
MANUAL SETUP
HORIZONTAL ANGLE (Horizontal angle)
Use to adjust the horizontal angle of sound beams for each
channel. By adjusting the horizontal angle of the sound
beams, you can optimize the sound beam paths. A test
tone is automatically output.
Choices: L90° to R90°
Adjust toward L (left) to move the direction of the output
to the left and adjust toward R (right) to move it to the
right.
VERTICAL ANGLE (Vertical angle)
Use to adjust the vertical angle of sound beams for each
speaker. By altering the beam path, you can optimize
sound beam angles.
Choices: –45° to +45°
Initial setting: 0°
• Adjust toward – (minus) to move the angle downward.
• Adjust toward + (plus) to move the angle upward.
BEAM TRAVEL LENGTH (Beam travel length)
A certain amount of delay must be applied to the sound
from each channel so that all sounds can arrive at the
listening position at the same time. This menu sets the
distance that sound beams travel after being output and
reflected off the wall until they arrive at the listening
position and adjusts the delay applied to the respective
channel.
The lines in the illustration below indicate the distance.
Choices: 0.3 m to 24.0 m (1.0 ft to 80.0 ft)
• Front L adjusts the distance the front left channel
sound beams travel.
• Front R adjusts the distance the front right channel
sound beams travel.
• Center adjusts the distance the center channel sound
beams travel.
• Surround L adjusts the distance the surround left
channel sound beams travel.
• Surround R adjusts the distance the surround right
channel sound beams travel.
y
We recommend that you use the setting optimized by AUTO
SETUP (see page 37). Adjust this parameter only when you
changed HORIZONTAL ANGLE (see page 80).
()
(+)
(+)
()
5 beam
Front L L90 R90
L65deg
0(deg)
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
*
a)HORIZONTAL ANGLE 1/5
p
p
p
p
5 beam
Front L (+)
0deg. ------0deg.
(-)
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
b)VERTICAL ANGLE 1/5
p
p
p
p
5 beam
Front L;;;;;;;6.0m
Front R;;;;;;;6.0m
Center;;;;;;;;2.5m
Surround L;;;;9.1m
Surround R;;;;9.1m
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
c)BEAM TRAVEL LENGTH
p
p
.
p
p