Operation Manual
Table Of Contents
- English
- INTRODUCTION
- PREPARATION
- Installation
- Connections
- Before connecting components
- Connections using HDMI cables
- Connecting a TV
- Connecting a DVD player/recorder
- Connecting a digital satellite tuner or a cable TV tuner
- Connecting a digital airwave tuner
- Connecting a portable audio player
- Connecting other external components
- Connecting a subwoofer
- Connecting the FM antenna
- About the RS-232C/IR-OUT/IR IN terminals
- Connecting the AC power supply cable
- SETUP
- BASIC OPERATION
- Playback
- FM tuning
- Enjoying surround sound
- Enjoying stereo sound
- Playing back sound clearly (My Beam)
- Using sound field programs
- Using the music enhancer
- Using the volume mode (Night listening enhancer/TV volume equal mode)
- Using the sleep timer
- Displaying the input source information
- Using the HDMI control feature
- ADVANCED OPERATION
- ADDITIONAL INFORMATION
- Français
- INTRODUCTION
- PRÉPARATIONS
- Installation
- Raccordements
- Avant de raccorder les appareils
- Raccordement avec des câbles HDMI
- Raccordement à un téléviseur
- Raccordement à lecteur/enregistreur de DVD
- Raccordement à un tuner satellite numérique ou à un tuner de télévision câblée
- Raccordement d’un tuner hertzien numérique
- Raccordement d’un lecteur audio portable
- Raccordement à des appareils externes
- Raccordement à un caisson de graves
- Raccordement d’une antenne FM
- À propos des prises RS-232C/IR-OUT/IR IN
- Raccordement du câble d’alimentation secteur
- SETUP
- OPÉRATIONS DE BASE
- Lecture
- Syntonisation FM
- Utilisation du son d’ambiance
- Utilisation du son stéréo
- Reproduction d’un son clair (My Beam)
- Utilisation des corrections de champs sonores
- Amélioration de la qualité musicale
- Utilisation du mode d’écoute tardive (Mode d’écoute tardive/Mode Égal au volume TV)
- Utilisation de la minuterie de mise hors service
- Affichage des informations relatives à la source d’entrée
- Utilisation de la fonction de commande HDMI
- OPÉRATIONS DÉTAILLÉES
- INFORMATIONS COMPLÉMENTAIRIES
- Italiano
- INTRODUZIONE
- PREPARAZIONE
- Installazione
- Collegamenti
- Prima di collegare i componenti
- Collegamenti con cavi HDMI
- Collegamento di un televisore
- Collegamento ad un lettore/masterizzatore DVD
- Collegamento di un sintonizzatore digitale satellitare o sintonizzatore per televisione via cavo
- Collegamento con un sintonizzatore digitale airwave
- Collegamento di un lettore portatile audio
- Collegamenti di altri componenti esterni
- Collegamento ad un subwoofer
- Collegamento dell’antenna FM
- I terminali RS-232C/IR-OUT/IR IN
- Collegamento del cavo di alimentazione a corrente alternata
- INSTALLAZIONE
- FUNZIONAMENTO DI BASE
- Riproduzione
- Sintonizzazione in FM
- Riproduzione surround
- Riproduzione stereo
- Riproduzione chiara di suoni (My Beam)
- Uso di programmi di campo sonoro
- Uso di Music Enhancer
- Uso delle modalita’ del volume (Modalità di ascolto notturno/modalità di volume invariante del te...
- Uso del timer di spegnimento
- Visualizzazione di informazioni sul segnale in ingresso
- Uso della caratteristica di controllo HDMI
- FUNZIONAMENTO AVANZATO
- INFORMAZIONI ADDIZIONALI
- Español
- INTRODUCCIÓN
- PREPARACIÓN
- Instalación
- Conexiones
- Antes de conectar componentes
- Conexiones usando cables HDMI
- Conexión de un TV
- Conexión de un reproductor/grabadora DVD
- Conexión de un sintonizador de satélite digital o un sintonizador de TV por cable
- Conexión de un sintonizador digital de ondas del aire
- Conexión de un reproductor de audio portátil
- Conexión de otros componentes externos
- Conexión de un altavoz de subgraves
- Conexión de la antena de FM
- Acerca de los terminales RS-232C/IR-OUT/IR IN
- Conexión del cable de alimentación de CA
- INSTALACIÓN
- FUNCIONAMIENTO BÁSICO
- Reproducción
- Sintonización de FM
- Disfrute del sonido surround
- Disfrute del sonido estéreo
- Reproducción clara del sonido (My Beam)
- Uso de programas de campos sonoros
- Uso del realzador de música
- Utilización del modo de volumen (Modo de escucha nocturna/Modo de igualación del volumen del TV)
- Utilización del temporizador para dormir
- Visualización de información de la fuente de entrada
- Utilización de la función de control HDMI
- FUNCIONAMIENTO AVANZADO
- INFORMACIÓN ADICIONAL
- List of remote control codes
- QUICK REFERENCE GUIDE
AUTO SETUP (IntelliBeam)
41 En
SETUP
English
5 Press / to select BEAM+SOUND
OPTIMZ, BEAM OPTIMZ only, or SOUND
OPTIMZ only and then press ENTER.
The following screen appears on your TV.
BEAM+SOUND OPTIMZ
(Beam optimization and sound optimization)
Use to optimize the beam angle, delay, volume, and
quality so that the parameters best match your listening
environment.
It is recommended that you should select this optimization
feature in the following cases:
• If you make settings for the first time.
• If the unit has been relocated.
• If your listening room has been restructured.
• If the objects in your listening room (furniture, etc.)
have been rearranged.
This menu takes about three minutes.
BEAM OPTIMZ only
(Beam optimization only)
Use to optimize the beam angle so that the parameter best
matches your listening environment.
This menu takes about one minute.
SOUND OPTIMZ only
(Sound optimization only)
Use to optimize the beam delay, volume, and quality so
that the parameters best match your listening environment.
It is recommended that you should select this optimization
feature in the following cases:
• If you have opened or closed the curtains in your
listening room before using this unit.
• If you have manually set the beam angle.
This menu takes about two minutes.
You must optimize the beam angle in the BEAM OPTIMZ only
procedure before starting the SOUND OPTIMZ only procedure.
6 Check the following points once again before
starting the AUTO SETUP procedure.
• Is the IntelliBeam microphone firmly connected to
this unit?
• Is the IntelliBeam microphone placed in a proper
location?
• Are there any large obstacles in between the
IntelliBeam microphone and the walls in your
listening room?
7 Press ENTER to start the AUTO SETUP
procedure.
The following screen appears on your TV and the
AUTO SETUP procedure starts in 10 seconds.
Leave the room quietly before starting the AUTO
SETUP procedure.
If an error occurs, an error buzzer is played and an
error message is displayed. See “Error messages for
AUTO SETUP” on page 43 for a complete list of
error messages and their proper remedies. Follow the
instructions and perform the AUTO SETUP
procedure again.
Note
ENTER
ENTER
PREPARATION & CHECK
Please connect the MIC.
Please place the MIC at least
1.8m/6ft away from the YSP
unit. The MIC should be set
at ear level when seated.
Measurement takes about 3min.
After [ENTER] is pressed,
please leave the room.
[ENTER]:Start [RETURN]:Cancel
AUTO SETUP
Will begin in 10sec
Please leave the room
**--------
[RETURN]:Cancel
AUTO SETUP START
ENTER
← Flashes