Operation Manual
Table Of Contents
- English
- INTRODUCTION
- PREPARATION
- Installation
- Connections
- Before connecting components
- Connections using HDMI cables
- Connecting a TV
- Connecting a DVD player/recorder
- Connecting a digital satellite tuner or a cable TV tuner
- Connecting a digital airwave tuner
- Connecting a portable audio player
- Connecting other external components
- Connecting a subwoofer
- Connecting the FM antenna
- About the RS-232C/IR-OUT/IR IN terminals
- Connecting the AC power supply cable
- SETUP
- BASIC OPERATION
- Playback
- FM tuning
- Enjoying surround sound
- Enjoying stereo sound
- Playing back sound clearly (My Beam)
- Using sound field programs
- Using the music enhancer
- Using the volume mode (Night listening enhancer/TV volume equal mode)
- Using the sleep timer
- Displaying the input source information
- Using the HDMI control feature
- ADVANCED OPERATION
- ADDITIONAL INFORMATION
- Français
- INTRODUCTION
- PRÉPARATIONS
- Installation
- Raccordements
- Avant de raccorder les appareils
- Raccordement avec des câbles HDMI
- Raccordement à un téléviseur
- Raccordement à lecteur/enregistreur de DVD
- Raccordement à un tuner satellite numérique ou à un tuner de télévision câblée
- Raccordement d’un tuner hertzien numérique
- Raccordement d’un lecteur audio portable
- Raccordement à des appareils externes
- Raccordement à un caisson de graves
- Raccordement d’une antenne FM
- À propos des prises RS-232C/IR-OUT/IR IN
- Raccordement du câble d’alimentation secteur
- SETUP
- OPÉRATIONS DE BASE
- Lecture
- Syntonisation FM
- Utilisation du son d’ambiance
- Utilisation du son stéréo
- Reproduction d’un son clair (My Beam)
- Utilisation des corrections de champs sonores
- Amélioration de la qualité musicale
- Utilisation du mode d’écoute tardive (Mode d’écoute tardive/Mode Égal au volume TV)
- Utilisation de la minuterie de mise hors service
- Affichage des informations relatives à la source d’entrée
- Utilisation de la fonction de commande HDMI
- OPÉRATIONS DÉTAILLÉES
- INFORMATIONS COMPLÉMENTAIRIES
- Italiano
- INTRODUZIONE
- PREPARAZIONE
- Installazione
- Collegamenti
- Prima di collegare i componenti
- Collegamenti con cavi HDMI
- Collegamento di un televisore
- Collegamento ad un lettore/masterizzatore DVD
- Collegamento di un sintonizzatore digitale satellitare o sintonizzatore per televisione via cavo
- Collegamento con un sintonizzatore digitale airwave
- Collegamento di un lettore portatile audio
- Collegamenti di altri componenti esterni
- Collegamento ad un subwoofer
- Collegamento dell’antenna FM
- I terminali RS-232C/IR-OUT/IR IN
- Collegamento del cavo di alimentazione a corrente alternata
- INSTALLAZIONE
- FUNZIONAMENTO DI BASE
- Riproduzione
- Sintonizzazione in FM
- Riproduzione surround
- Riproduzione stereo
- Riproduzione chiara di suoni (My Beam)
- Uso di programmi di campo sonoro
- Uso di Music Enhancer
- Uso delle modalita’ del volume (Modalità di ascolto notturno/modalità di volume invariante del te...
- Uso del timer di spegnimento
- Visualizzazione di informazioni sul segnale in ingresso
- Uso della caratteristica di controllo HDMI
- FUNZIONAMENTO AVANZATO
- INFORMAZIONI ADDIZIONALI
- Español
- INTRODUCCIÓN
- PREPARACIÓN
- Instalación
- Conexiones
- Antes de conectar componentes
- Conexiones usando cables HDMI
- Conexión de un TV
- Conexión de un reproductor/grabadora DVD
- Conexión de un sintonizador de satélite digital o un sintonizador de TV por cable
- Conexión de un sintonizador digital de ondas del aire
- Conexión de un reproductor de audio portátil
- Conexión de otros componentes externos
- Conexión de un altavoz de subgraves
- Conexión de la antena de FM
- Acerca de los terminales RS-232C/IR-OUT/IR IN
- Conexión del cable de alimentación de CA
- INSTALACIÓN
- FUNCIONAMIENTO BÁSICO
- Reproducción
- Sintonización de FM
- Disfrute del sonido surround
- Disfrute del sonido estéreo
- Reproducción clara del sonido (My Beam)
- Uso de programas de campos sonoros
- Uso del realzador de música
- Utilización del modo de volumen (Modo de escucha nocturna/Modo de igualación del volumen del TV)
- Utilización del temporizador para dormir
- Visualización de información de la fuente de entrada
- Utilización de la función de control HDMI
- FUNCIONAMIENTO AVANZADO
- INFORMACIÓN ADICIONAL
- List of remote control codes
- QUICK REFERENCE GUIDE
AUTO SETUP (IntelliBeam)
43 En
SETUP
English
■ Error messages for AUTO SETUP
Before the AUTO SETUP procedure starts
While the AUTO SETUP procedure is in progress
If one of the errors listed below except E-1 is displayed, press RETURN. In case you have started the AUTO SETUP
procedure by pressing AUTO SETUP in step 3, run the procedure again from step 3 after the screen disappears. In case
you have started the AUTO SETUP procedure by pressing MENU in step 3, run the procedure again from step 4 after the
screen in step 3 is displayed. Run MANUAL SETUP if the problem is difficult to be saved.
Error message Cause Remedy
See
page
ERROR E-2
No MIC detected. Please check
MIC connection and re-try.
The IntelliBeam microphone is not
connected to this unit.
Connect the IntelliBeam microphone to
this unit.
38
Error message Cause Remedy
See
page
ERROR E-1
Please test in quieter environment.
There is too much unwanted noise in
your listening room.
Make sure that your listening room is as
quiet as possible. You may want to
choose certain hours during the day
when there is not much noise coming
from outside.
—
ERROR E-2
No MIC detected. Please check
MIC connection and re-try.
The IntelliBeam microphone was
disconnected while the AUTO SETUP
procedure was in progress.
Make sure that the IntelliBeam
microphone is firmly connected to this
unit.
38
ERROR E-3
Unexpected control is detected.
Please re-try.
Some other operations were performed
on this unit while the AUTO SETUP
procedure was in progress.
Do not perform any other operations
while the AUTO SETUP procedure is in
progress.
—
ERROR E-4
Please check MIC position. MIC
should be set in front of YSP.
The IntelliBeam microphone is not
placed in front of this unit.
Make sure that the IntelliBeam
microphone is installed in front of this
unit.
38
ERROR E-5
Please check MIC position. MIC
should be set above 1.8m/6.0ft.
The IntelliBeam microphone is not
placed in the right distance from this
unit.
Make sure that the IntelliBeam
microphone is installed more than 1.8 m
(6.0 ft) from the front of this unit and
within 1 m (3.3 ft) from the center height
of this unit.
38
ERROR E-6
Volume level is lower than
expected. Please check MIC
position/connection and re-try.
The IntelliBeam microphone cannot
collect the sound produced by this unit
because the sound output level is too low.
Make sure that the IntelliBeam
microphone is firmly connected to this
unit and placed in a proper location. If
the problem persists, contact the nearest
authorized Yamaha service center for
assistance.
38
ERROR E-7
Unexpected error happened.
Please re-try.
An internal system error occurred. Repeat the AUTO SETUP procedure.
—