Operation Manual
Table Of Contents
- English
- INTRODUCTION
- PREPARATION
- Installation
- Connections
- Before connecting components
- Connections using HDMI cables
- Connecting a TV
- Connecting a DVD player/recorder
- Connecting a digital satellite tuner or a cable TV tuner
- Connecting a digital airwave tuner
- Connecting a portable audio player
- Connecting other external components
- Connecting a subwoofer
- Connecting the FM antenna
- About the RS-232C/IR-OUT/IR IN terminals
- Connecting the AC power supply cable
- SETUP
- BASIC OPERATION
- Playback
- FM tuning
- Enjoying surround sound
- Enjoying stereo sound
- Playing back sound clearly (My Beam)
- Using sound field programs
- Using the music enhancer
- Using the volume mode (Night listening enhancer/TV volume equal mode)
- Using the sleep timer
- Displaying the input source information
- Using the HDMI control feature
- ADVANCED OPERATION
- ADDITIONAL INFORMATION
- Français
- INTRODUCTION
- PRÉPARATIONS
- Installation
- Raccordements
- Avant de raccorder les appareils
- Raccordement avec des câbles HDMI
- Raccordement à un téléviseur
- Raccordement à lecteur/enregistreur de DVD
- Raccordement à un tuner satellite numérique ou à un tuner de télévision câblée
- Raccordement d’un tuner hertzien numérique
- Raccordement d’un lecteur audio portable
- Raccordement à des appareils externes
- Raccordement à un caisson de graves
- Raccordement d’une antenne FM
- À propos des prises RS-232C/IR-OUT/IR IN
- Raccordement du câble d’alimentation secteur
- SETUP
- OPÉRATIONS DE BASE
- Lecture
- Syntonisation FM
- Utilisation du son d’ambiance
- Utilisation du son stéréo
- Reproduction d’un son clair (My Beam)
- Utilisation des corrections de champs sonores
- Amélioration de la qualité musicale
- Utilisation du mode d’écoute tardive (Mode d’écoute tardive/Mode Égal au volume TV)
- Utilisation de la minuterie de mise hors service
- Affichage des informations relatives à la source d’entrée
- Utilisation de la fonction de commande HDMI
- OPÉRATIONS DÉTAILLÉES
- INFORMATIONS COMPLÉMENTAIRIES
- Italiano
- INTRODUZIONE
- PREPARAZIONE
- Installazione
- Collegamenti
- Prima di collegare i componenti
- Collegamenti con cavi HDMI
- Collegamento di un televisore
- Collegamento ad un lettore/masterizzatore DVD
- Collegamento di un sintonizzatore digitale satellitare o sintonizzatore per televisione via cavo
- Collegamento con un sintonizzatore digitale airwave
- Collegamento di un lettore portatile audio
- Collegamenti di altri componenti esterni
- Collegamento ad un subwoofer
- Collegamento dell’antenna FM
- I terminali RS-232C/IR-OUT/IR IN
- Collegamento del cavo di alimentazione a corrente alternata
- INSTALLAZIONE
- FUNZIONAMENTO DI BASE
- Riproduzione
- Sintonizzazione in FM
- Riproduzione surround
- Riproduzione stereo
- Riproduzione chiara di suoni (My Beam)
- Uso di programmi di campo sonoro
- Uso di Music Enhancer
- Uso delle modalita’ del volume (Modalità di ascolto notturno/modalità di volume invariante del te...
- Uso del timer di spegnimento
- Visualizzazione di informazioni sul segnale in ingresso
- Uso della caratteristica di controllo HDMI
- FUNZIONAMENTO AVANZATO
- INFORMAZIONI ADDIZIONALI
- Español
- INTRODUCCIÓN
- PREPARACIÓN
- Instalación
- Conexiones
- Antes de conectar componentes
- Conexiones usando cables HDMI
- Conexión de un TV
- Conexión de un reproductor/grabadora DVD
- Conexión de un sintonizador de satélite digital o un sintonizador de TV por cable
- Conexión de un sintonizador digital de ondas del aire
- Conexión de un reproductor de audio portátil
- Conexión de otros componentes externos
- Conexión de un altavoz de subgraves
- Conexión de la antena de FM
- Acerca de los terminales RS-232C/IR-OUT/IR IN
- Conexión del cable de alimentación de CA
- INSTALACIÓN
- FUNCIONAMIENTO BÁSICO
- Reproducción
- Sintonización de FM
- Disfrute del sonido surround
- Disfrute del sonido estéreo
- Reproducción clara del sonido (My Beam)
- Uso de programas de campos sonoros
- Uso del realzador de música
- Utilización del modo de volumen (Modo de escucha nocturna/Modo de igualación del volumen del TV)
- Utilización del temporizador para dormir
- Visualización de información de la fuente de entrada
- Utilización de la función de control HDMI
- FUNCIONAMIENTO AVANZADO
- INFORMACIÓN ADICIONAL
- List of remote control codes
- QUICK REFERENCE GUIDE
PLAYBACK
47 En
BASIC
OPERATION
English
You can play back sound from the components connected
to this unit simply by pressing INPUT on the front panel
repeatedly or pressing one of the input selector buttons
(TV, STB, DVD, AUX1, AUX2, or AUX3) on the remote
control. The name of the selected input source and the
type of corresponding input mode appear in the front
panel display.
■ Front panel operations
Press INPUT on the front panel repeatedly to
toggle between TV, STB, DVD, AUX1, AUX2, and
AUX3.
The name of the corresponding input source and the type
of current input mode are displayed in the front panel
display.
■ Remote control operations
y
In addition to controlling this unit, you can also operate other AV
components if you set up the remote control with the appropriate
remote control codes and set the operation mode selector to TV/
AV to change the control area (see page 103).
Press TV to play back a TV program.
Press STB to play back a satellite broadcast.
Press DVD to play back a DVD.
Playback
Selecting the input source
STEREO
MY BEAM
PRESET/TUNE
MEMORYSEARCH
SLEEP
INPUTMODE
ENHANCER MENU
RETURNDISPLAY
ENTER
OFF
SPORTS
5BEAM ST+3BEAM 3BEAM
MUSIC MOVIE
VOL MODE
AUTO
SETUP
CATFM/XM
MACRO
TV
INPUT1
ENTRY
CAT/
A-E
4
6
321
AUX1 AUX2
STB
TV
DVD
AUX3
DOCK
+10
0
789
5
YSP
TV/AV
SUR. DECODE
MY SUR.
INPUT VOLUME STANDBY/ON
+
(U.S.A. and Canada models)
TV
TV/STB AUTO
Name of the selected
input source
Type of the selected
input mode
STB
TV/STB AUTO
DVD
DVD AUTO