Digital Sound ProjectorTM Owner’s Manual English for Europe, Asia, Africa, Oceania, and Latin America
The “ Corporation. ” logo and “IntelliBeam” are trademarks of Yamaha Manufactured under license from Cambridge Mechatronics Ltd. Worldwide patents applied for. The “ ” logo and “Digital Sound Projector™” are trademarks of Cambridge Mechatronics Ltd. The “ ” logo and “Cinema DSP” are registered trademarks of Yamaha Corporation. “HDMI”, the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC.
INTRODUCTION CONTENTS INTRODUCTION Features........................................................................... 4 General operation flow .................................................. 5 Controls and functions................................................... 6 PREPARATION Installation .................................................................... 10 Connections................................................................... 12 Before connecting components .............................
INTRODUCTION Features Digital Sound Projector The Digital Sound Projector technology allows one slim unit to control and steer multiple channels of sound to generate multichannel surround sound, thus eliminates the need for satellite loudspeakers and cabling normally associated with conventional surround sound systems. This unit also employs the beam modes that let you enjoy the surround sound (5 Beam, Stereo+3 Beam, 3 Beam for 5.1-channel audio, 5 Beam plus 2, Stereo + 3 Beam plus 2, 3 Beam for 7.
INTRODUCTION General operation flow 2 Run AUTO SETUP to optimize the beam and sound settings. “AUTO SETUP (IntelliBeam)” (page 15). 3 Play back a source. “Playback” (page 21). 4 Change the playback method (surround/stereo), CINEMA DSP and/or beam modes settings. “Playback mode” (page 22). 5 Configure this unit’s settings and/or set remote control codes. “Customizing this unit (SET MENU)” (page 30), “Controlling external components” (page 39).
Controls and functions Front panel 12 4 5 INPUT VOLUME 1 Remote control sensor Receives infrared signals from the remote control (page 14). 2 Power LED Lights up when the power is turned on (page 21). 3 Front panel display Shows information about the operational status of this unit (page 7). 4 INPUT Press repeatedly to switch between input sources. 5 VOLUME +/– Controls the volume level of all audio channels.
INTRODUCTION Front panel display 12 3 4 5 TRNS RECV 7 q DIGITAL PLUS q EX PCM q TRUE HD q PL x A 96 24 HD MSTR HI RES Neo:6 ES DSCRT MTRX SLEEP O UNIVOLUME ENHANCER BASS EXT 0 89 m ft dB B C VOL L C R SL SB SR EX1 LFE EX2 D 8 SLEEP indicator Lights up when the sleep timer is set (page 28). 2 CINEMA DSP indicator Lights up when a sound field program is selected (page 22). 9 Volume level indicator Displays the current volume level.
Rear panel A B 1 OUT HDMI IN 1 FRONT SURROUND IR-OUT SUR. BACK PRE OUT IN 2 IN 3 OUT HDMI 0 IN 1 IN 4 IN 2 COMPONENT PR PB VIDEO Y IN VIDEO IN 3 SUB WOOFER VIDEO OUT L L R R AUX 1 TV AUDIO IN SYSTEM CONNECTOR AUX 2 AUX 1 DIGITAL IN IN 4 TV IR IN RS-232C L CENTER R R R SUB WOOFER FRONT L SURROUND L SUR.
INTRODUCTION Remote control A AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod FM MOVIE MUSIC ENTER TAINMENT E CINEMA DSP program keys Select the CINEMA DSP programs (page 22). C F SURROUND/STEREO Switches between surround and stereo playback (page 22).
PREPARATION Installation This section describes a suitable installation location to install this unit using a wall mount bracket, a rack, a table top stand or a floor stand. To achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound beams (page 11). Depending on your installation environment, connections with external components (page 12) should be done before installation.
INTRODUCTION ■ Ideal installation condition : Object such as furniture Parallel installation (with 5 Beam) Corner installation (with Stereo+3Beam) 40° to 50° PREPARATION ■ For better listening environment Example 1 Install this unit as close to the exact center of the wall as possible. PLAYBACK FEATURES Example 2 Install this unit so that the sound beams can be reflected off the walls. SETTINGS Example 3 Install this unit as close to the exact front of your normal listening position as possible.
Connections Component video pin cable Before connecting components ■ Cables used for connections The symbols on the left of cable names (such as , , and ) correspond with the symbols described in “Connecting your TV and Blu-ray disc player” (page 12) and “Connecting audio video components” (page 13). ■ Information on HDMI An HDMI cable can transmit both audio and video signals at the same time. If your TV and other components have HDMI jacks, use HDMI cables for simpler and easier connections.
Determine the connection types depending on the jacks available on this unit and your external components. The symbols in the following table correspond with the symbols described in “Cables used for connections” (page 12).
Connecting the FM antenna Connect the supplied FM antenna or your antenna to the FM ANTENNA jack on this unit. Antenna TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod FM MOVIE ENTER TAINMENT MUSIC OFF CINEMA DSP SURROUND STEREO TOP MENU MENU OPTION SETUP RETURN TV VOL CH VOLUME TV TV MUTE UNIVOLUME FM ANTENNA G ENTER INPUT MUTE SUR.
INTRODUCTION Changing OSD language You can select an OSD language among English, German, French, Spanish, Italian, Dutch and Russian. Before operating the following steps, select this unit as the video input on your TV. 1 3)LANGUAGE SETUP . ENGLISH DEUTSCH Francais ESPANOL ITALIANO NEDERLANDS 2 Press G / to select the desired language and then press GENTER.
■ Assembling the supplied cardboard microphone stand 1 TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod FM MOVIE ENTER TAINMENT MUSIC 2 Remove “SOUND OPTIMZ ONLY” CINEMA DSP STEREO G ENTER TOP MENU MENU OPTION SETUP RETURN TV VOL CH VOLUME I 3 TV Fit in Place horizontally 4 TV MUTE UNIVOLUME INPUT MUTE SUR.
y Press G / to select “AUTO SETUP” and then press GENTER. B)AUTO SETUP p p [ ]/[ ]:Up/Down [ENTER]:Enter Press G / to select “BEAM+SOUND OPTIMZ”, “BEAM OPTIMZ ONLY” or “SOUND OPTIMZ ONLY” and then press GENTER. 6 Press GENTER to confirm the results. The menu screen disappears in two seconds.
■ Error messages for AUTO SETUP TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod FM HDMI 4 MOVIE ENTER TAINMENT MUSIC If an error message is displayed on your TV, check the error message list to solve the problem and then follow the procedure below. [ERROR E-1]: Press GENTER to run the AUTO SETUP procedure again or IRETURN to cancel the operation Other errors: Press IRETURN to cancel the operation and then run the AUTO SETUP procedure again.
INTRODUCTION Using the system memory You can save the current beam and sound settings in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment. For example, if there are curtains in the path of sound beams, the effectiveness of the sound beams will vary depending on whether the curtains are open or closed. y Saving settings 1 5 Press ISETUP. 2)MEMORY SAVE MEMORY1 Saving... p p .
4 C TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod FM MOVIE ENTER TAINMENT MUSIC Press G / to select the memory number to be loaded and then press GENTER. D 1)MEMORY LOAD MEMORY1 Load Now ? OFF CINEMA DSP SURROUND STEREO G ENTER TOP MENU OPTION SETUP RETURN TV VOL CH VOLUME K TV TV MUTE INPUT UNIVOLUME 5 Press GENTER. The beam and sound settings saved in the selected memory number are loaded. MUTE SUR.
INTRODUCTION PLAYBACK FEATURES Playback Playing back sources 1 Press CPower (p) key to turn on this unit. 2 Turn on external components (TV, Blu-ray disc player, etc.) connected to this unit. 3 Press one of the DInput selector keys to select an external component as an input source. Input source name y • You can change the input source name displayed on the front panel display (page 35).
Status When PCM signals are being input TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod MOVIE OFF PCM E y • You can select an audio signal to be played back (Auto or DTS) In “Decoder Mode” (page 29).
Press the desired ECINEMA DSP key. The CINEMA DSP category name appears in the front panel display and the CINEMA DSP indicator (page 7) lights up. 2 While the category name is displayed, press the ECINEMA DSP key repeatedly. Each time you press the key, program switches. ■ Movie (MOVIE) Sci-Fi This program clearly reproduces dialogs and special sound effects of the latest science fiction films and lets you feel a broad and expansive cinematic space.
3 Beam TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod FM MOVIE ENTER TAINMENT MUSIC OFF y STEREO G ENTER TOP MENU MENU OPTION SETUP RETURN TV VOL CH VOLUME TV TV MUTE INPUT UNIVOLUME This unit can decode 2-channel sources for 7.1-channel or 5.1-channel playback so that you can enjoy a variety of surround sound effects by switching the decoder. D CINEMA DSP SURROUND I Outputs sound beams from the front right and left and center channels.
INTRODUCTION FM tuning The FM tuner of this unit provides the following two modes for tuning. Note • Frequency tuning mode You can tune into a desired FM station by searching or specifying its frequency. • Preset tuning mode You can preset the frequencies of FM stations by registering them to specific numbers, and later just select those numbers to tune into. y • The reception is noisy and the sound is hard to listen, switch to monaural mode to get better reception.
“Manual Preset” appears on the front panel display, followed soon by the preset number to which the station will be registered. 4 Press G / to select a preset station to be cleared, and then press GENTER. The selected preset station is cleared. If the operation is completed, “Cleared” appears. To clear the multiple preset stations, repeat step 4. 5 To exit from the menu, press IOPTION.
INTRODUCTION Program type Descriptions News Current Affairs Current Affairs Information Information Sport Sport Education Education Drama Drama Cultures Cultures Science Science Varied Speech Varied Speech Pop Music Pop Music Rock Music Rock Music Easy Listening Easy Listening Music Light Classics Light Classical Music Serious Classic Serious Classical Music Other Music Other Music PREPARATION News Playback Playback mode Playing back iPod™ Playing back iPod™/iPhone™ By us
Useful features TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod FM MOVIE ENTER TAINMENT MUSIC D This function adjusts the volume level of the TV so that it will not increase suddenly when whenever the contents being broadcast change (due to commercials, etc.). OFF CINEMA DSP SURROUND STEREO G ENTER TOP MENU MENU OPTION SETUP RETURN TV VOL CH VOLUME TV I INPUT MUTE SUR.
Press G / to select the desired menu item and then press GENTER. 4 Press G / to select the desired setting and then press GENTER. 5 To exit from the menu, press IOPTION. Displaying the input signal information Use to display information of the sampling frequency, video signal type, and resolution for each input source on the front panel display. 1 The following menu items are provided for each input source.
SETTINGS TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod FM MOVIE ENTER TAINMENT MUSIC Customizing this unit (SET MENU) D SET MENU items CINEMA DSP SURROUND STEREO G ENTER TOP MENU MENU I OPTION SETUP RETURN TV VOL CH VOLUME TV You can manually configure various settings for this unit in “SET MENU”. OFF Menu MEMORY Sub menu Features Page LOAD Loads the beam and sound settings saved in the memory. 19 SAVE Saves the current beam and sound settings to the memory.
1 1 Press ISETUP. SET MENU In “SETTING PARAMETERS 1/3”, configure “INSTALLED POSITION”. Select the installed position of this unit. Choices: FLAT TO WALL* (parallel to wall), ANGLE TO WALL OR CORNER (angle to wall or corner) FLAT TO WALL ANGLE TO WALL OR CORNER PREPARATION p p .
Control range (from this unit): 1.8 m to 9.0 m (6.0 ft to 30.0 ft) Control range (from left wall): 0.6 m to 11.4 m (2.0 ft to 38.0 ft) TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod FM HDMI 4 MOVIE MUSIC FLAT TO WALL ENTER TAINMENT 1.8 to 9.0 m (6.0 to 30.0 ft) STEREO • Configure this setting only when you have adjusted “HORIZONTAL ANGLE”. Control range: 0.3 m to 24.0 m (1.0 ft to 80.0 ft) MENU OPTION SETUP RETURN TV VOL CH VOLUME TV TV MUTE UNIVOLUME 0.6 to 11.4 m (2.0 to 38.
y • To adjust the volume of each channel, see “CHANNEL LEVEL” (page 34) Choices: OFF*, ON • Select “ON” to configure the sound direction. Adjust the image location for the front left channel (LEFT). The higher the percentage, the louder the output from the center Without adjustment Adjust the image location for the front right channel (RIGHT).
■ DRC:Dynamic Range Control (Dynamic range control) TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod FM HDMI 4 MOVIE MUSIC ENTER TAINMENT SET MENU → SOUND SET MENU → DRC:Dynamic Range Control Use to adjust the dynamic range compression. Dynamic range is the difference between the smallest sound that can be heard above the noise of the equipment and the biggest sound that can be heard without distortion.
• The parameters from “BASS OUT” to “LFE Level” are settings for the PRE OUT jacks when they are selected as audio output jacks. BASS OUT (Bass sound output redirection) Use to redirect the output of bass sounds. The settings under “BASS OUT” are for the PRE OUT jacks. Choices: SUBWOOFER, FRONT* • Select SUBWOOFER to output bass sounds from the subwoofer. • Select FRONT to output bass sounds from the external front right and left speakers.
TV C AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod FM HDMI 4 MOVIE ENTER TAINMENT MUSIC Press G / to select a input source name. Choices: TV, Blu-ray, DVD, HDDVD, STB, Satelite, Game 3 To exit from the menu, press IRETURN. Entering an original name OFF CINEMA DSP SURROUND 2 1 Press G / be renamed. 2 Press GENTER. “ ” appears above the new name display to indicate the position to be entered. 3 Press G / to place the _ (underscore) under the space or the character you want to edit.
SET MENU → DISPLAY MENU → OSD SETUP Use to adjust the display position and select the background color of the OSD. SET MENU → DISPLAY MENU → LANGUAGE SETUP Use to select the language used in the OSD. OSD SHIFT (OSD shift) Use to adjust the vertical position of the OSD. Adjust toward the – (minus) direction to raise the position of the OSD, and adjust toward the + (plus) direction to lower it.
A B TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod FM MOVIE ENTER TAINMENT MUSIC D OFF E CINEMA DSP SURROUND F STEREO G ENTER TOP MENU SETUP RETURN TV VOL CH VOLUME TV TV MUTE UNIVOLUME H I J MENU OPTION INPUT L MUTE R.INPUT POWER (Power-on by remote control input keys) Select whether or not to automatically turn on this unit when you select an input source on the remote control. To enable the function, select “R.INPUT PW: ON”. Choices: R.INPUT PW: OFF*, R.
INTRODUCTION Controlling external components Note Depending on the external AV component you are using, you may not be able to operate the component with the remote control, even if a remote control code is set. In this case, operate the component using the supplied remote control. 1 While holding down OCODE SET, press DInput selector key to which the remote control code is assigned. ATransmission indicator flashes twice. B TV p Turns on the power of your TV or set it to the standby mode.
APPENDIX Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. ■ General Problem Cause Remedy See page This unit does not operate properly.
Digital audio signals cannot be played back. (q DIGITAL indicator does not light up in the front panel display.) Remedy See page The playback component is connected to this unit with an analog connection. Connect them with an HDMI connection or a digital connection. 12 The external component is not set to output digital audio signals. Refer to the owner’s manual supplied with your component and check the setting. — Bit streaming is disabled on the external component.
Problem Cannot operate external components with the remote control of this unit. Cause Remedy See page The external component you want to operate is not selected as the input source. Press the desired DInput selector key to select the external component you want to operate. 39 The remote control code was not correctly set. Set the remote control code correctly or try another code for the same manufacturer using the “List of remote control codes”.
■ Dolby TrueHD Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (left, center, and right) and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (low-frequency effect), the system has a total of 5.1-channels (LFE is counted as 0.1-channel).
for the optical disc players and AV receivers/amplifiers of the future, DTS-HD Master Audio also remains fully compatible with the existing multichannel audio systems that incorporate DTS Digital Surround. ■ HDMI HDMI (High-Definition Multimedia Interface) is the first industrysupported, uncompressed, all-digital audio/video interface.
INTRODUCTION List of remote control codes TV DUMONT DURABRAND DUX D-VISION DWIN DYNAMIC DYNATECH DYNATRON DYNEX ECE ELBE 00201, 15401, 16301 16801, 17601, 18201 15701, 16201 15701, 16201 09201, 10101 14801 15401 15701, 16201 15701 00401 03501, 15001, 15701, 16201 ELBIT 14701 ELECS 14701 ELECTRATUNE 15401 ELECTRO TECH 14801 ELECTROBAND 00001 ELECTROHOME 15401, 16301, 17901, 19001 ELECTRONIKA 14701 ELEKTA 14801, 15701, 16201 ELEKTRA 18601 ELEKTRONIKA 14701 ELG 15701, 16201 ELIN 00401, 06901, 14701, 14801,
FORTRESS FRABA FRIAC FRONTECH 01301, 15401 15701, 16201 15701, 16201 02201, 03301, 03701, 14801, 16101 FUJITSU 08701, 10401, 15401, 15701, 16201 FUJITSU GENERAL 15001 FUNAI 02501, 02701, 03701, 14801, 15401, 17201, 17701, 18201 FUTURE 15701, 16201 FUTURETECH 02701 GALAXI 15701, 16201 GALAXIS 15701, 16201 GALERIA 14801 GATEWAY 13301, 13401 GBC 14801, 15901 GE 00301, 00501, 00601, 01201, 02601, 02701, 05601, 07101, 11801, 12201, 12601, 15801, 16301, 16401, 16601, 17301, 17401, 17901, 18401, 18701, 19001, 191
PYMI QUASAR SAMSUX SAMTRON SANKY SANSEI SANSUI 15401, 17901 16701 15401 05601 05801, 14701, 14801, 15401, 15701, 16201, 16801 SANYO 01401, 02001, 02701, 02901, 04301, 10201, 14801, 15301, 15701, 16201, 16301, 18901 SAVE 15701, 16201 SBR 00401, 14701, 15701, 16201 SCEPTRE 20201 SCHAUB LORENZ 04601, 15901, 16101 SCHNEIDER 00401, 03301, 04801, 08501, 14701, 14801, 15001, 15301, 15501, 15601, 15701, 15801, 16101, 16201 SCOTCH 02601, 16301, 17901 SCOTT 02601, 02701, 03101, 15401, 16301, 17901 SEARS 00501, 0080
15701, 15901, 16201 SOUNDESIGN 02601, 02701, 15401, 16301, 17801, 17901 SOUNDMASTER 14801 SOUNDWAVE 00401, 05201, 15701, 16201 SOWA 00601, 00901, 01201, 02101, 02601 SPECTRICIAN 14701, 15401 SQUAREVIEW 02501, 18201 SSS 02701, 16301 STANDARD 00101, 14801, 15701, 15901, 16201 STARLITE 02701, 14801, 15701, 16201 STARLUX 14801 STERN 02201, 03501, 15001, 15301 STRATO 15701, 16201 SUNIC LINE 15701, 16201 SUNKAI 15701, 16201 SUNSTAR 14801, 15701, 16201 SUNWOOD 14701, 14801, 15701, 16201 SUPERSCAN 17201 SUPERTEC 14
01307 00907 00307 00707 00207 00807 00607 01007, 01107 00507 01207 00407 00007, 00107 DVD RECORDER PHILIPS VICTOR YAMAHA 00806 01406 00706 VCR ADMIRAL ADVENTURA AIKO AIWA APPENDIX 01102 00002 02102 00002, 00402, 02202, 02602, 02702 AKAI 00602, 02302, 04902, 05902, 06602 AKIBA 01402 ALBA 01402, 02102, 02302, 02702 AMERICA ACTION LOEWE OPTA 04602 LOGIK 01402, 02002 LUXOR 00802, 01102, 01602, 04902 LXI 00402, 05702, 05902 M ELECTRONIC 00002, 04702 MAGNASONIC 04302 MAGNAVOX 00002, 00302, 00502, 01502, 056
PENTAX 00702, 05402, 06202, 06502 PERDIO 00002, 04702 PHILCO 00302, 05602, 06402 PHILIPS 00302, 01502, 03202, 03902, 04002, 04602, 06402 PHONOLA 01502 PILOT 00402, 05702 PIONEER 00702, 01302, 01502, 05802, 06002, 06202, 06702 POLK AUDIO 01502 PROFITRONIC 02002 PROLINE 00002, 04702 PROSCAN 01202, 03802, 05602 PROTEC 01402 PULSAR 00502 PYE 01502 QUARTER 06102 QUARTZ 06102 QUASAR 00302, 03702, 05602, 06402 QUELLE 01502, 04602, 04802, 05002 RADIO SHACK 05502, 05602, 05702, 05902, 06102, 06302, 06402 RADIOLA 01
WISI XSAT ZEHNDER ZENITH 00604, 01304, 01404 00104 04004 03304 INTRODUCTION PREPARATION PLAYBACK FEATURES ADVANCED OPERATION APPENDIX 02304, 05104, 06904 03404, 05304 03604 02604 00104, 00604, 00704, 01004, 01804, 05604 KREISELMEYER 00604 LABGEAR 06304 LOGIX 03804 LORENZEN 01104 MAGNAVOX 02004, 02204 MANHATTAN 01404, 03804, 04204 MARANTZ 00704 MEDIASAT 03104 MEMOREX 02204 METRONIC 00004 MITSUBISHI 02304 MOTOROLA 03504 MYRYAD 00704 NEXT LEVEL 03504 NOKIA 01404, 02104, 02404, 04904, 05704, 06804 OCTALTV 03
Index ■ Numerics 2-channel source surround decode ............................... 24 3Beam, beam mode ...................................................... 24 5.1ch beam mode .......................................................... 23 5.1-channel source 7.1-channel decode ........................ 24 5Beam, beam mode ...................................................... 23 5BeamPlus2, beam mode ............................................. 24 7.1ch beam mode ............................................
■ N Numeric keys, controlling external component .......... 39 Numeric keys, Remote control ...................................... 9 ■ O ■ P ■ R R.INPUT POWER, ADVANCED SETUP ................. 38 Rack using, installation ............................................... 10 Radio Data System tuning ........................................... 26 Rear panel ...................................................................... 8 RECV, Wireless indicators ............................................
© 2009 Yamaha Corporation All rights reserved.
