UAB Contents Supplied items ...................................................................... 2 Features ................................................................................. 2 Part names and functions of the unit .................................. 3 Installations........................................................................... 4 Digital Sound Projector Connections........................................................................... 6 Operations...........................
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. • Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
Supplied items Features Make sure you have received all of the following items. Enjoy powerful and realistic sound from the unit. The unit is a home theater system which can be easily installed and connected to a TV and other devices. Unit • Digital sound projection Digital sound projection technology. Integrated multiple small speakers optimize the individual sound beams. The surround sound effect is enhanced by reflecting the beams onto the walls of the room (p.5).
Part names and functions of the unit Front panel Rear panel A Indicators A TV input jack Indicate the status of the unit. The indicators will dim automatically if no operations are performed for 5 seconds. B Remote control sensor Receives infrared signals from the remote control of the unit (p.8). Receives infrared signals from the TV remote control when the TV Remote Repeater function is enabled (p.15). C INPUT key Selects an input source to be played back (p.8).
Installations Attaching the unit to a wall How to install on the wall 1 Attach the mounting template on a wall and mark for the screw holes. Place the unit on a flat surface such as on top of a TV cabinet. Tapes or thumbtacks Mounting template (supplied) Screw holes Cautions • Do not place the unit on/under any other devices such as BD player in a pile. Doing so may cause a malfunction due to vibrations. • The unit contains acoustic suspension speakers.
Installation position of the unit and selecting a YSP POSITION key The surround sound is achieved by reflecting the sound beams off walls as shown in the illustration below. For optimum surround effect, turn on the unit and select the YSP POSITION key according to the installation position of the unit. Refer to the “ YSP POSITION (YSP position) keys” (p.9) in “Operations” to select the key according to the installation position of the unit. NOTE • Keep a distance of more than 2 meters (6.
Connections Connect to a TV (or other peripheral device). Unit (rear) CAUTIONS • Do not connect the power cable of the unit to the AC wall outlet before making connections. • Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or AC wall outlet. Power cable To AC wall outlet 1 Connect the TV and unit with the optical cable (supplied). Optical cable Remove the cap of the optical cable and check the direction of the plug.
Analog connection of an external device (game console) Analog connection of a portable device You can connect an external device, such as a game console, to the ANALOG input jacks of the unit with an RCA stereo cable. You can connect a portable device, such as a portable music player, to the PORTABLE input jacks of the unit with a 3.5 mm stereo mini plug cable. RCA stereo cable 3.5 mm stereo mini plug cable Portable music player Analog audio output Game console (etc.
Operations Preparing the remote control Peel off the protection sheet before use. 1 Input keys Remote control signal transmitter Transmits infrared signals. Select an input source to be played back. TV ....................TV audio BD/DVD ...........Audio from a device connected to the BD/DVD input jack ANALOG .........Audio from a device connected to the ANALOG input jack PORTABLE .....Audio from a device connected to the PORTABLE input jack BLUETOOTH ...
4 (power) key Turns on or off (standby) the unit. Green (turned on) Red (Bluetooth standby) 7 CLEAR VOICE key For optimum surround sound effect, select a preset position mode according to where the unit is installed. Hold down the selected YSP POSITION key for more than 3 seconds until the respective indicators on the front panel flash. Flash 3 times (enabled), flash once (disabled) L (Left) key..........When the unit is installed on the left side of the room C (Center) key ....
Enjoy stereoscopic surround effects Select the surround mode key to enjoy realistic surround effects that closely resemble a movie theater, the middle of a music concert, or a sports field event, by Yamaha’s sound field program, “CINEMA DSP.” You can select a surround mode key that best suits the source from MOVIE, MUSIC, SPORTS, GAME, or TV PROGRAM. 1 2 Play back the source. Press one of the surround mode keys (MOVIE, MUSIC, SPORTS, GAME, or TV PROGRAM). The SURROUND indicator lights up.
Listening to the sound from a BLUETOOTH device Pairing a Bluetooth device with the unit You can listen to the wireless sound from a Bluetooth device, such as a smartphone or digital music player. See also the operating manual of the Bluetooth device for more details. 1 When connecting to a Bluetooth device for the first time, “pairing” between the device and unit is required. Once “pairing” is completed, subsequent connection will be made automatically.
Playing back audio from a Bluetooth device on the unit 1 Press the BLUETOOTH key on the supplied remote control to select Bluetooth as the input source. The BLUETOOTH indicator on the front panel lights up in green. Lights up 2 Using the Bluetooth standby mode The Bluetooth standby mode allows you to turn on (or off) the unit automatically, that interlocked by the operation of the Bluetooth device. How to set With the unit turned on, hold down the BLUETOOTH STANDBY key for more than 3 seconds.
Settings 3-2 While pointing your TV remote control at the remote control sensor, hold down the mute key for more than 1 second twice or three times. Controlling the unit with TV remote control (TV remote control learning function) Approx. 30 cm (1 ft) TV remote control You can use the TV remote control to turn on/off the unit or adjust its volume by having the unit learn the TV remote control signals. NOTE • This function is available only when your TV remote control uses infrared signals.
5 Make the unit learn the volume (+) operation. 5-1 Press VOLUME (+) on the front panel of the unit. Clearing all learned operations 1 5-2 While pointing your TV remote control at the remote control sensor, hold down the volume (+) key for more than 1 second twice or three times. Result Successfully learned Learning has failed * Repeat from Step 5-1. 6 6-1 Bleep/buzzer When the unit is in the learning mode, the indicators on the front panel flash as shown below.
Controlling the TV via the unit (when the TV’s remote control sensor is blocked) When the TV Remote Repeater function is enabled, the unit receives TV remote control signals at the TV remote control sensor (on front) and transmits the signals from the TV Remote Repeater (on rear). This function is useful when you cannot operate your TV from the remote control because the remote control sensor of the TV is blocked by the unit.
2 While the test-tone is output from the channel to be adjusted, press the SUBWOOFER key (+ or –) to balance the volume level with the other channels. Using an external subwoofer The unit has dual built-in subwoofers; however you can connect an external subwoofer when you want to enhance low frequency sound. Perform the following steps to change the setting when using an external subwoofer. 1 Connect the unit to the external subwoofer with a pin cable.
Making sound easy to listen at low volume You can change the dynamic range to make sounds easy to hear at a low volume. 1 2 Turn off the unit. Press the key for the desired mode for more than 5 seconds. Initializing the settings of the unit Follow the procedure below to initialize the unit. When the unit does not operate properly for any reason, initialization may solve the problem. 1 2 Turn off the unit. Hold down seconds.
Troubleshooting Audio Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: A The power cables of the unit, TV and playback devices (such as BD players) are connected to AC wall outlets securely.
Remote control Problem Cause Remedy The unit cannot be controlled using the remote control. The unit is out of the operating range. Use the remote control within the operating range (p.8). The batteries are weak. Replace with new batteries (p.8). The remote control sensor of the unit is exposed to direct sunlight or strong lighting. Adjust the lighting angle, or reposition the unit. The TV cannot be controlled using the TV remote control.
Bluetooth Problem Cause Remedy Cannot make the unit paired with the Bluetooth device. BLUETOOTH is not selected as the input source. Select BLUETOOTH as the input source. A Bluetooth adaptor, etc. that you want to pair with the unit has a password other than “0000”. Use a Bluetooth adaptor, etc. whose password is “0000”. The unit and device are too far apart. Move the device closer to the unit. There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.
When surround effect is not enough How to install YRB-100 The unit achieves its surround sound effects by projecting sound beams which reflect off walls. The sound beams are not reflected toward to the listening position caused by furniture, etc., in the path of sound beams, or the room shape. In this case, the sound may become unbalanced. The unit outputs sound beams according to the “YSP position” settings (p.9) as shown in the following illustrations. Install the YRB-100 in the path of the sound beam.
Specifications Item Amplifier Array Driver Subwoofer Decoder Input Jacks Output Jack Bluetooth Digital Sound Projector (YSP-1400) Maximum Rated Output Power Subwoofer 30 W x 2 Type Acoustic suspension type (Magnetic shielding type) Driver 2.8 cm (1-1/8") cone x 8 Frequency Response 500 Hz to 22 kHz Type Bass reflex type (Non-magnetic shielding type) General U.S.A.
Bluetooth • Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft) employing the 2.4 GHz frequency band, a band which can be used without a license. Handling Bluetooth communications • The 2.4 GHz band used by Bluetooth compatible devices is a radio band shared by many types of equipment.
AVEEA11102A Important Notice: Guarantee Information for customers in EEA* and Switzerland English For detailed guarantee information about this Yamaha product, and Pan-EEA* and Switzerland warranty service, please either visit the website address below (Printable file is available at our website) or contact the Yamaha representative office for your country. * EEA: European Economic Area http://europe.yamaha.