User Manual

SPMK20 INSTALLATION GUIDE
Please see the pictures below outlining the steps for installation of the SPMK20 wall bracket. If you have any
questions, please call Yamaha’s (Australia) help desk on 1300 739 411.
Please note, the size of the HDMI lead is important. NOT ALL HDMI leads will t. Refer below for images of the leads
required and their dimensions.
©2016 Yamaha Music Australia Pty. Ltd.
Install the SPMK20 bracket to the
wall using included xings.
Use exible, thin HDMI cables
and/or 90-degree adaptors.
Cable shown from underneath
SPMK20 bracket.
Connect HDMI cables to correct
inputs/outputs on the Sound Bar.
Depth of HDMI plug should not
exceed 25 mm (refer picture).
Back plate of bracket sits 20 mm
from wall.
Run cables. In this example, cables
are run through a wall plate.
Place the Sound Bar on the
SPMK20 bracket and fasten it.
The Sound Bar installation is now
complete.
1
4
7
2
5
8
3
6
9

Summary of content (1 pages)