Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Preparations
- Playback
- Basic operation for playback
- Enjoying sound based on your preference
- Playback with 3D surround sound
- Playback with surround sound
- Enjoying three-dimensional surround sound (CINEMA DSP 3D/CINEMA DSP)
- 2-channel playback (stereo playback mode)
- Delivering sound to a specified location (target playback mode)
- Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer)
- Clear playback of human voices (CLEAR VOICE)
- Adjusting the position from which dialog is heard (Dialog Lift)
- Adjusting volume for each channel
- Using useful features
- Wireless playback of audio via Bluetooth connection
- Networks
- Settings
- Troubleshooting
- Messages
- When surround effect is not enough
- Basic Knowledge of Surround Sound
- Glossary
- Specs
- Index
- Quick Reference Guide
- MusicCast Setup Guide
- Supplement for Pandora
- Supplement for Rhapsody
- Supplement to Listen to SiriusXM
- Supplement for Spotify
SETTINGS ➤ Setup menu En 74
Sound
Adjust the volume of each channel to balance output levels. Use test sounds output
from each channel to adjust volume for optimal balance.
Settings
Front L, Front R, Center, Surround L, Surround R, Height L, Height R, Subwoofer
Adjustable range
-20 to +20
• When “My Surround” of “Channel Out” is set to “On” the following items can be configured (p. 73).
–Center
– Surround L/R
– Subwoofer
Adjust this unit’s volume and dynamic range for optimal balance. When “On” is
selected, dynamic range is adjusted as follows for optimal listening at low volumes,
such as might be used at night.
When the volume level is low:
Narrow the dynamic range. Loud sound is played back softer, and soft sound which is
hard to be listened to is played back louder.
When the volume level is high:
Widen the dynamic range. For both soft and loud sounds, source sound is played back
without adjusting volume.
Settings
• When set to “On”, “Dynamic Range” is automatically set to “Max”.
Channel Level
Setup Menu
➜
Sound
➜
Channel Level
Adaptive DRC
Setup Menu
➜
Sound
➜
Adaptive DRC
Off The dynamic range is not adjusted automatically.
On (default) Adjust the dynamic range automatically.
On
Output level
Output level
Off
Off
Input level Input level
Volume: low Volume: high
On