Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Preparations
- Playback
- Basic operation for playback
- Enjoying sound based on your preference
- Playback with 3D surround sound
- Playback with surround sound
- Enjoying three-dimensional surround sound (CINEMA DSP 3D/CINEMA DSP)
- 2-channel playback (stereo playback mode)
- Delivering sound to a specified location (target playback mode)
- Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer)
- Clear playback of human voices (CLEAR VOICE)
- Adjusting the position from which dialog is heard (Dialog Lift)
- Adjusting volume for each channel
- Using useful features
- Wireless playback of audio via Bluetooth connection
- Networks
- Settings
- Troubleshooting
- Messages
- When surround effect is not enough
- Basic Knowledge of Surround Sound
- Glossary
- Specs
- Index
- Quick Reference Guide
- MusicCast Setup Guide
- Supplement for Pandora
- Supplement for Rhapsody
- Supplement to Listen to SiriusXM
- Supplement for Spotify
SETTINGS ➤ Setup menu En 75
Adjust this unit’s dynamic range (difference between maximum and minimum volumes).
Settings
• “Adaptive DRC” is automatically set to “Off” when the settings other than “Max” is selected.
Configure the DTS decoder for use with input of DTS audio signals.
❑ Neural:X
Specify whether or not Neural:X is used to generate channels not present in input
sources.
Settings
• Neural:X is the DTS:X surround sound decoder.
❑ Dialog Control
Increase the volume of dialog to make listening easier.
Adjustable range
0 (default) to 6 (dB)
• This setting is effective only for playback of DTS:X input sources that support dialog control.
Dynamic Range
Setup Menu
➜
Sound
➜
Dynamic Range
Min/Auto
Min: Sets dynamic range at a level that supports comfortable listening at low
volumes.
Auto: Sets dynamic range in accordance with information received from input
signal.
Standard The dynamic range recommended for regular home use.
Max (default) Outputs sound without adjusting the dynamic range of the input signals.
DTS
Setup Menu
➜
Sound
➜
DTS
Disable Neural:X will not be used.
Enable (default) Neural:X will be used.
“Neural:X” and “Dialog Control” may be provided with a firmware update.
See our website for the latest information.
The following settings are available for the DTS decoder before “Neural:X”
and “Dialog Control” are provided with firmware update.
Configure the DTS Neo:6 decoder for use when DTS audio signals are input.
Settings
• The DTS Neo:6 decoder is disabled with stereo playback and target playback.
Neo:6 Cinema
(default)
Use the DTS Neo:6 decoder suitable for movies.
Neo:6 Music Use the DTS Neo:6 decoder suitable for music.