Manual

You can select the type of audio input signals of the selected input source according to your preference or the conditions

of the input source. This function is available for TV/STB, DVD, and AUX.

We recommend setting the input mode to AUTO ill most cases.

Set the operation mode selector to YSP.

2 Press one of the input selector buttons to

select the desired input source.

t :

3 Press INPUTMODE repeatedly to toggle

between input modes.

"' ' :"' ("i "'T'(-

i;"i.5

When DVD is selected

as the input source

iNPUTMODE

ii....."5iF-:_i°ii2

When TV or STB is selected

as the input source

"..,{°""i°"

i"_ 'T"C"

_.." s ,,°,

When AUX is selected as

the input source

ANALOG is not available as the input mode of DVD and

AUX.

• AUTO

Automatically selects audio input signals in the following

priority order:

1) Dolby Digital or DTS

2) PCM

3) Analog

_%,._

Use this input mode in most cases.

• DTS

Selects only digital signals encoded in DTS.

Compared to AUTO, this input mode provides greater

stability while playing back CDs or LDs encoded in DTS.

• ANALOG

Selects only analog signals.

Even when both digital and analog signals are input

simultaneously, only analog signals are selected.

You can adjust the default input mode to be selected when the

power of this unit is turned on by adjusting INPUT MODE in

INPUT MENU (see page 66).

73 En