Manual

Setting macros for the TV without the
tuning capability
Press and hold CODE SET and press one of
the input selector buttons to select the input
source you want to set macros for.
Proceed to step 2 while holding down CODE SET.
• Operating macros
Press and hold one of the input selector buttons
for approximately two seconds to select the input
source you want to operate macros for.
The TV input changes at the same time the input mode
changes.
TV MUTE
Whileholdingdown,press %_,._.iii:.,_._ii!_,..ii!,
Press MACRO while holding down CODE
SET.
TV MUTE While holding MACRO
down, press
Press INPUT1.
Check that the TV screen changes to the input l
screen.
1
Canceling the macros
Press and hold CODE SET and press one of
the input selector buttons to select the input
source you want to cancel the macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE While holding
down, press %@,,.. _.., _,.,,
4
INPUT1
Press TV INPUT repeatedly until the screen
changes to the display of the input source
selected in step 1.
TV iNPUT
2
3
Press MACRO while holding down CODE
SET.
TV MUTE While holding MACRO
down, press
Press ENTER to cancel the macros.
5 Press ENTER to confirm the setting.
81 En