UCA YST-FSW100 i
IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
English FCC INFORMATION (for US customers) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. Compliance with FCC regulations does not guarantee that interference will not occur in all installations.
Precautions: Read this before operating this unit • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. • Install this unit in a cool, dry, clean place - away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose this unit to rain or water. • Never open the cabinet.
English SPECIAL INSTRUCTIONS FOR U.K. MODEL If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the following instructions. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.
Introduction Features Introduction Features Supplied accessories • This subwoofer system employs Advanced Yamaha Active Servo Technology II which Yamaha has developed for reproducting higher quality super-bass sound. (Refer to page 6 for details on Advanced Yamaha Active Servo Technology II) This super bass sound adds a more realistic, theater-in-the-home effect to your stereo system. Please confirm that the following item is included in the package. • The slim design matches the interior of your home.
English Connections Caution: Plug the power cables for the subwoofer and other audio/video components into an AC outlet only after you complete all other connections. Flat TV (The rear panel of various Flat TV may differ in appearance.) Basic connection example Connect the subwoofer cable to the output jack of your AV amplifier, receiver or TV and to the INPUT jack of the subwoofer. SUBWOOFER Amplifier (The rear panel of various amplifiers may differ in appearance.) SUBWOOFER Subwoofer rear panel (U.
• The system connection ( U.S and CANADA model only ) This unit has a system connection jack. Use the supplied system connector cable when connecting a YAMAHA component equipped with a system connector jack. When connected, the power mode (ON/OFF) of this unit can be controlled by the power button of the YAMAHA component. During this time, set the Power button of this unit to OFF. The Power of this unit can be turned on even when the power switch is set to OFF.
3 English Using the subwoofer 2 VOLUME For Asia and General models POWER Subwoofer top panel VOLTAGE SELECTOR See page 4 for details. (Australia model) 1 Pre-adjusting the subwoofer volume SUBWOOFER SYSTEM YST-FSW100 VOLUME POWER 2 3 VOLUME OFF/ SYSTEM Subwoofer top panel ON (U.
Advanced Yamaha Active Servo Technology II In 1998, Yamaha brought to the marketplace speaker systems utilizing YST ( Yamaha Active Servo Technology ) to give powerful, high quality bass reproduction. This technique uses a direct connection between the amplifier and speaker, allowing accurate signal transmission and precise speaker control. reflex method. This allows for bass reproduction from much smaller cabinets than was previously possible.
English Troubleshooting Refer to the chart below if the unit does not function properly. If the problem you are experiencing is not listed, or if the instructions fail to help you resolve the problem, disconnect the power cord and contact your authorized Yamaha dealer or service center. Problem Cause Remedy Power is not supplied even though the POWER switch is set to the ON position. The power plug is not securely connected. Turn the power switch OFF, then connect the power plug securely. No sound.
Specifications Type ..........Advanced Yamaha Active Servo Technology II Frequency characteristics Driver .............................. 16 cm (6.5") cone woofer Magnetically shielded type Output Power ...............................75W (5 Ω 10 %) 100 dB Dynamic Power ..................................... 130W, 5 Ω 90 Input Impedance ...............................................12 kΩ 80 Frequency Response ................... 30 Hz – 200 Hz 70 Input Sensitivity .............
m❂❊n_✳❍ ✷❂❈❆ ✤✤ ✻❉❑❍s❅❂❖, M❂❖ ✥✩, ✥✣✣5 ✫:✤✧ ✷M This product mainly uses lead-free solder. Cet appareil utilise principalement de la soudure sans plomb. YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA © 2005 ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY ELECTRONIQUE FRANCE S.A.