UCA POWERED MULTIMEDIA SUBWOOFER YST-MSW8 Active Servo Technology Active Servo Technology POWERED MULTIMEDIA SUBWOOFER YST-MSW8 BASS 0 OWNER’S MANUAL / MODE D’EMPLOI English ...............................1 Français .............................
• Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
18 Grounding or Polarization — Precautions should be taken so that the grounding or polarization is not defeated. FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2.
System Example / Exemple de connexion Example 1 4 5 or 2 YST-MSW8 LINE IN LINE OUT ABOVE 150Hz 1 AUTO STANDBY ON OFF INPUT 1 INPUT 2 TO LEFT SPEAKER Active Servo LINE IN 3 OUTPUT Technology LINE OUT ABOVE 150Hz (ADJ.
Cautions Connections & Controls Please read the following operating precautions before use: Front Panel • When disconnecting the AC power cord from an AC receptacle, hold and pull the plug, not the power cord. • If the YST-MSW8 is not going to be used for a while, disconnect the AC power cord from the AC receptacle. • Always disconnect the AC power cord from the AC receptacle before making any connections. • The YST-MSW8 does not contain any user serviceable parts.
Volume Adjustment • If the YST-MSW8 is connected to an output jack for a sub-woofer on a powered main speaker (such as the Yamaha YST-M15, YST-M8, etc.) as shown in System example 1 on page 1, raise the VOLUME control of the YST-MSW8 to the maximum and set the BASS control to the noon or one-o’clock position. Then, use the volume control of the powered main speakers to adjust the overall volume.
Specifications Type ................................. Active Servo Technology Output power ................. 15 W (100 Hz, 4 Ω at T.H.D.=10%) Input sensitivity.............. 45 mV (100 Hz, 4 Ω at 15 W) Input impedance ............ 20 kΩ Frequency response ....... 40 to 250 Hz (–10 dB) Speaker unit ................... 12 cm (5") cone, magnetic shielding Output impedance ......... 600 Ω Output level .................... 45mV (at 45mV Rated Input) Power consumption ....... 20 W Power supply U.S.A.
Printed in China IP V287530