iMPORTANT SAFETY iNSTRUCTiONS RISKOFELECTRIC SHOCK 00 NOTOPEN 1 Read these instructions. 2 Keep these 3 Heed all warnings. instructions. 4 Follow CAUTION: TO REDUCE THE RISK OF 5 Do not use this apparatus ELECTRIC SHOCK, DO NOT REMOVE COVER 6 (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO ©UALIFIED Clean only with dry cloth. 7 Do not block any ventilation openings, l[nstall in accordance with the manufacturer's instructions. SERVICE PERSONNEL. all instructions.
FCC INFORMATION 1. IMPORTANT UNIT! NOTICE: DO NOT MODIFYTHIS (for US customers) Compliance with FCC regulations does not guarantee that interference will net occur in all installations. If this This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Medifications not expressly product is found to be the source of interference, appreved by Yamaha may void your authority, granted by the FCC, to use the product.
Precautions:Readthis before operating thisunit • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. • Install this unit in a cool, dry, clean place - away fi'om windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of hulnming (transformers, motors). To pl'event fire or electrical shock, do not expose this unit to rain or water. • Never open the cabinet. If any l\_l'eign objects drop into the set, contact
• VOLTAGE SELECTOR lFor China, Korea, Asia and General models) The voltage selector switch on the rear panel of this unit must be set tbr your local main voltage BEFORE plugging this unit into the AC main supply. Voltages are 110-120/220-240 V AC, 50/60 Hz. Table of contents Precautions:Read this beforeoperating this unit ............................ iii Introduction ...................................................... Features.........................................................................
introduction Supplied accessories Features This subwoofer system employs Adwmced Yamaha Active Servo Technology II which Yamaha has developed for reproducing higher quality super-bass sound. (Refer to page 5 for details on Adwmced Yamaha Active Servo Technology I1) This super bass sound adds a more realistic, theater-in-the-home effect to your stereo system. Please confirm that tile following item is included in tile package.
Connections Caution: Plug the power cables Jbr the subwoofer and other audio/video components into an AC outlet only after you complete all other connections. After you complete a subwoofcr connection, plug the amplifier, other audio/video component, and the subwoofer into an AC outlet of appropriate voltage. Basicconnectionexample Connect a subwoofer cable to the output jack of your AV amplifier and to tile INPUT jack of the su bwoofer.
Usingthe subwoofer Pre-adjustino the subwoofer voJuNle Before you use the subwoofer, first adjust the volume balance between the subwoofer and the front Subwoofer rear paneE speakers by following Set the VOLUME the procedure control below, to minimum (0), 2. Turn on the power to all other components, 3. Press the POWER The power in green, switch to the ON position, indicator on the rear panel lights up 4.
AdvancedYamahaActiveServo TechnologyII In 1998, Yamaha brought to the marketplace speaker systems utilizing YST (YamahaActive Servo Technology) to give powerful, high quality bass reproduction. This technique uses a direct connection between the amplifier and speaker, allowing accurate signal transmission and precise speaker control. reflex method. This allows for bass reproduction from much smaller cabinets them was previously possible.
Troubleshooting Refer to the chari below- if the unit listed, or if the instructions authorized Yam_dla dealer does not function fail to help you resolve or service center. properly, l[f the problem the problem, Problem disconnect you are experiencing the power cord Cause Poweris notsuppliedeventhoughthe POWERswitchis settothe 0R pusition. The power connected. R0 sound. The VOLUME your Remedy plug is not securely Turn the power connect control is not grad contact is set to 0.
Specifications Type .....Advanced Yamaha Active Serve Technology II Frequency response Driver ................................. 20 cm (8") cone woofer Magnetically shielded type 100 de Output Power ................................................. 50 W Dynamic Power ......................................... 100 W, 5 £_ / input Impedance ............................................... 12 k£_ Frequency Response ................... 28 Hz - 200 Hz input Sensitivity / 70 / .............
@YAMAHA @2006 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 9R1, CANADA ELECTRONIK EUROPA G.m.b.R. SIEMENSSTR. 22-94, 25462 RELLINGEN BEI HAMBURG, GERMANY ELECTRONIQUE PRANCE S.A. RUE AMBROISE CROIZAT BP7O CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEXO2, ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD187GQ, ENGLAND SCANDINAVIA A.