UCA POWERED MULTIMEDIA SPEAKERS YST-MS50 OWNER’S MANUAL ...................1 MODE D’EMPLOI .......................
• Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
18 Grounding or Polarization — Precautions should be taken so that the grounding or polarization is not defeated. COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party: Address: Telephone: FAX: Type of Equipment: Model Name: Yamaha Corporation of America 6600 Orangethorpe Ave. Buena Park, CA90622 714-522-9011 714-527-5782 Powered Multimedia Speaker YST-MS50 This device complies with Part 15 of the FCC Rules.
Connection / Connexion 1 INPUT 1 2 INPUT 2 TO SUB Wo. 3 TO SUB Wo. TO RIGHT SPEAKER TO LEFT SPEAKER SATELLITE LEFT SPEAKER SUBWOOFER SATELLITE RIGHT SPEAKER POWERED MULTIMEDIA SPEAKERS YST-MS50 BASS 0 10 AC cord VOLUME POWERED MULTIMEDIA SPEAKERS (To AC outlet) 1 3.
Cautions Please read the following operating precautions before use: • When you disconnect the AC power cable from an AC outlet, hold the plug, not the cord. • If the YST-MS50s are not going to be used for a while, disconnect the AC power cord from the AC receptacle. • Always disconnect the AC power cord from the AC receptacle before making any connections. • The YST-MS50s do not contain any user serviceable parts. Refer all servicing to your Yamaha dealer. • Never open the cabinet.
Non skid pad To prevent the speakers from sliding around, attach the supplied pads to the four points on the bottom of each satellite speaker. Place the speaker on a stable, flat surface. Specifications Type .......................... Advanced Active Servo Technology Output power Satellite speakers...... 20 W + 20 W (1 kHz, 4 Ω at T.H.D.=10%) Subwoofer ................ 40 W (100 Hz, 5 Ω at T.H.D.=10%) Input sensitivity .................200 mV (1 kHz, 4 Ω at 20 W) Input impedance ...............
Pieds anti-dérapage Pour éviter que les baffles glissent, nous vous conseillons de fixer les pieds anti-dérapage aux quatre coins de la face inférieure des baffles satellites. Placez le baffle sur une surface stable et plate. Fiche technique Type .........................Advanced Active Servo Technology Puissance de sortie Baffles satellites 20 W + 20 W (1 kHz, 4 Ω avec une dist. harm. =10%) Subwoofer 40 W (100 Hz, 5 Ω avec une dist. harm. =10%) Sensibilité d’entrée ...............