User Manual

6•YV2030MS YT2030MS Owner’s Manual
Assembly
3. Tighten the screws in the order of q slant stays
and w pedal stay.
4. Set the main unit upside down.
To prevent damage to the floor and the main unit, leave the
main unit in the shipping package, or place a carpet or a
soft cloth on the floor where the main unit will be placed.
5. Turn the leg assembly upside down, put it on the
main unit, and then secure it with the four screws.
NOTE
If the direction of legs and main unit is not correct, the location
pins and holes may be misaligned, and may not be assembled
properly.
6. To prevent the pedal from moving uncontrollably,
secure the damper by hooking the damper belt tip
to the hook of the main unit.
7. Stand the instrument upright while being careful
to avoid overturning or falling of instrument.
8. Lock the casters by pressing the stoppers of the
left and right casters.
9. Lower the damper pedal.
Unbuckle the damper belt to avoid excessive tension to the
belt when raising the position of the instrument height in
step 11.
Be careful not to pinch
your fingers!
CAUTION
Dumper belt