User Manual

YVC-1000 User's Manual
11
Connect the microphone and power cables supplied with the product.
1 Connect the microphone to the
Control Unit using the microphone
cable supplied with the product.
2 Connect the power cable to the
power terminal of the Control Unit.
3 Connect the power plug to an outlet.
The product enters the standby mode, and the power
button ( ) lights up red.
• When connecting the microphone cable, be sure to
match the color of the labels on the microphone cable
and of the microphone output terminal (OUT).
• Be sure to fully plug the power cable into the power
terminal of the Control Unit and the outlet.
If the product is used in an arrangement or in a conference with many participants where the product alone will not be
sufficient, connect two or more microphones and external speakers. For details, refer to "Using the optional
microphone (YVC-MIC1000EX)" (page 25) and "Using external speakers" (page 27).
The product also allows you to amplify the sound from connected external microphones, such as handheld
microphones, in your location while having a conversation with the remote location. For details, refer to "Using
external microphones" (page 26).
Connecting the microphone and power cables
1
1
3
2
Power button
Match the
color of the
labels.
Plug into an
outlet
Notes
Adding microphones and speakers