User Manual

YVC-1000 User's Manual
33
When not using a Bluetooth connection, you can disable the Bluetooth function. To use a Bluetooth connection again,
enable the Bluetooth function.
■ Disabling the Bluetooth function
1 When the power is on (the power
button ( ) lights up green), press
and hold the power button ( ) for 2
seconds or more to enter standby
mode.
The product enters the standby mode, and the power
button ( ) lights up red.
2 Press the power button ( ) while
holding down the Bluetooth button
( ) and the volume - button ( ) at
the same time, then release the
power button ( ) only.
The lamps on the level indicator will light up
moving horizontally, and the power-on operation
starts. Be sure to hold down the Bluetooth button
( ) and the volume - button ( ).
3 When the Bluetooth function is
disabled, you will be notified by voice
guidance. When the level indicator is
turned off, release the Bluetooth
button ( ) and the volume - button
().
Check whether the Bluetooth button ( ) is not lit.
■ Enabling the Bluetooth function
1 When the power is on (the power
button ( ) lights up green), press
and hold the power button ( ) for 2
seconds or more to enter standby
mode.
The product enters the standby mode, and the power
button ( ) lights up red.
2 Press the power button ( ) while
holding down the Bluetooth button
( ), then release the power button
( ) only.
The lamps on the level indicator will light up
moving horizontally, and the power-on operation
starts. Be sure to hold down the Bluetooth button
().
3 When the Bluetooth function is
enabled, you will be notified by voice
guidance. When the level indicator is
turned off, release the Bluetooth
button ( ).
Check whether the Bluetooth button ( ) is lit.
Enabling or disabling the Bluetooth function