User Manual

35
YVC-300 User's Manual
English
Yo u hear noise. The remote party has a problem with
their device configuration or operating
environment.
-
The remote party
hears noise.
The product has a device that
generates noise near it.
Keep the product as far away
from noise sources as
possible.
The product is installed in a noisy
room.
If any device is generating
noise, turn it off.
Sound is distorted. A videoconference system connected
to the EXT IN terminal has a high
output level.
Decrease the output level of
the videoconference system.
The microphone sensitivity on the
remote party is high.
Ask the remote party to
reduce their microphone
sensitivity.
Sound is distorted on
the remote party.
Yo ur microphone has a high input level. Take the product away from
people who are talking.
The microphone sensitivity of the PC or
Mac connected via USB is high.
Reduce the microphone
sensitivity.
(→Page 17, Page 20)
A videoconference system connected
to the EXT OUT terminal does not
provide a line-level input.
Connect a videoconference
system that supports a line-
level input.
A videoconference system connected
to the EXT OUT terminal has a high
output vol
ume
.
Tu
rn down the volume on the
videoconference system.
The speaker volume on the remote
party is high.
Ask the remote party to turn
down their speaker.
The volume on the
remote party is low.
The microphone sensitivity of the PC or
Mac connected via USB is low.
Increase the microphone
sensitivity on that machine.
(→Page 17, Page 20)
A videoconference system connected
to the EXT OUT terminal has a low
output volume.
Turn up the volume on the
videoconference system.
Symptom Cause Action