User Manual

Table Of Contents
14
YVC-330 User's Manual
This chapter describes how to connect to each communication device.
After the connection is established, check that sound is output correctly.
Check the following before the connection procedure
Make sure that you have the supplied USB cable available.
In addition, the PC connected to the product must meet the following system requirements:
OS: Windows (*1)
USB: USB 2.0 or later
(*1) For the supported versions, refer to the following website:
https://uc.yamaha.com/
•You cannot connect more than one microphone or speaker including this product to one PC and use them at the same
time.
Use the supplied USB cable only. Using a different USB cable may cause the product to malfunction.
The product must be connected directly to a PC. Connecting the product via a USB hub may cause the product to
malfunction.
In rare cases, an audio playback may be interrupted due to PC usage, such as the workload or limited free space in
memory.
Connecting the devices
Connect between the product and a PC through the supplied USB cable.
Tips
The product receives power from the PC through the USB cable (USB bus powered).
•You do not need to install a separate USB driver because the PC recognizes the product as a standard USB
audio device.
Connecting to Communication Equipment
Connecting to a PC using the USB cable
Notes
To the USB terminal