User Manual

32
YVC-330 User's Manual
3 Press and hold the both volume
buttons ( ) simultaneously for at
least 0.5 seconds.
A notification sound rings when the setting is
applied. The microphone indicator goes
back to the previous state, lighting up green
or blue (flashing red if the microphone is
muted).
Return the settings of the product to the factory
settings.
1 Press and hold the both volume
buttons ( ) simultaneously for at
least 2 seconds.
A notification sound rings, and the
microphone indicator flashes white.
2 Press and hold the on/off-hook button
( ) and the volume - button ( )
simultaneously for at least 2 seconds.
A notification sound rings. The volume level
indicator lights up green, the illuminated
symbols moving back and forth. The other
indicators turn off.
3 When the volume level indicator turns
off and is in the started-up state, the
product now has the factory settings.
Tip
Retu rning the product to the factory settings will
clear various settings, such as Bluetooth pairing
information. Reconfigure the settings as
necessary.
By enabling SoundCap, which is comprised of
the "Far Field Noise Reduction (FFNR)", "Self-
Silence", and "Self-Volume Balancer" functions,
you can automatically mute distracting noise
around you and deliver only the sound from the
pick-up range (radius of 1 m) to the remote
party. This also automatically adjusts the
volume of the sound from the speakers based
on the noise around you.
Enable SoundCap if using this product in an
open workspace, and disable SoundCap if
using this product in a conference room.
If enabling SoundCap, install this product within 1 m
(3.3 ft) from all participants. (→Page 13)
■ Checking settings of SoundCap
When the microphone is not muted, if the
microphone indicator is lit in blue, then
SoundCap is enabled; if it is lit in green, then
SoundCap is disabled.
■ Enabling or disabling SoundCap
Press the microphone mute button ( ) and the
volume button ( ) simultaneously.
A notification sound rings and the SoundCap is
enabled or disabled.
Returning to the factory
settings
Using SoundCap
Note