User`s manual

12
This section describes how to connect each communication device.
After connecting them, check whether or not sounds are output normally.
■ Before connecting, check the following.
Prepare the USB cable supplied with the product.
The following system environment is required in the PC to be connected to the product.
• OS: 32-bit or 64-bit Windows 8.1, 32-bit or 64-bit Windows 8, 32-bit or 64-bit Windows 7
• USB: USB 2.0 or later
• It is not possible to connect and use more than one microphone or speaker including the product to one PC at the
same time.
• Do not use a cable other than the USB cable supplied with the product. If a different USB cable is used, it may
cause operational problems.
• The product must be connected directly to a PC. If the product is connected to a PC via a USB hub, it may cause
operational problems.
• In rare cases, the audio playback may be interrupted due to PC conditions such as the workload or limited free
space in memory.
■ Connection
Connect the product to a PC using the supplied USB cable.
Before connecting them, set the product to the standby mode.
y
You do not need to install the USB driver separately because the product is recognized as a basic USB audio device by the PC.
Connecting to communication equipment
Connecting to a PC using the USB cable
Notes
To USB port
Plug into an
outlet
Connect to the
microphone