User guide - YVC-330

10
YVC-330 User's Manual
■ How the volume level indicator (Page 9: !0) works
In addition to the above, the indicator indicates the setting of the product, as described in
"Selecting a connected device on the EXT IN/OUT terminals" (page 31). Also, when an error
occurs, it displays the details of the error. (→Page 33)
■ How the microphone indicators (Page 9: w) work
In addition to the above, the indicators flash white in various setting modes. (→Page 32)
Also, when an error occurs, they flash red at high speed (at 0.1-second intervals). (→Page 33)
Status Description
Example
( ● : On, ○ : Off, : Flashing)
Normal
operation
The input level
of incoming
audio signals
from the
remote party is
indicated.
○○○○○
No audio signal is
present.
●●●○○
Audio signals are
present.
●●●●●
Maximum audio signal
input.
When the
speaker
volume is
being adjusted
(→Page 30)
The specified
speaker
volume level is
indicated.
○○○○○
The speaker volume
level is set to minimum.
●●●○○
The speaker volume
level is set to medium.
●●●●●
The speaker volume
level is set to maximum.
When the
speaker is
muted
(→Page 30)
The indicator
indicates that
the speaker is
muted.
The indicator symbols
at the current volume
level will flash.
When the
product is
being started
The indicator
indicates that
the product is
now starting.
●●○○○
→
←
○○○●●
The illuminated symbols
move back and forth
until the product is
completely started.
Status Description
When SoundCap is disabled
(→Page 32)
Lit in green.
(They light up brighter when the voice
is input.)
When SoundCap is enabled
(→Page 32)
Lit in blue.
(They light up brighter when the voice
is input.)
When the microphone is muted
(→Page 30)
Flashes red.
When incoming Bluetooth
connection requests are received
(→Page 31)
Flashes green or blue (red when the
microphone is muted) (at 0.25-second
intervals).