User Manual

4•YV2030MS YT2030MS Owner’s Manual
Introduction
Thank you for purchasing the Yamaha VIBRAPHONE YV2030MS or METALLOPHONE YT2030MS .
This vibraphone or metallophone, can be used in school performances or playing by hobbyists.
To get full use and performance enjoyment from this instrument, please read this owner’s manual carefully before using it. After you
have read the manual, keep it in a safe and handy place for future reference. The illustrations in this manual show the
YV2030MS ,
but the information applies to the
YT2030MS (except where indicated). For handling a vibraphone variable-speed driver, refer to the
manual bundled with the vibraphone variable-speed driver.
Confirmation of Packing Contents
The shipping package of your YV2030MS / YT2030MS should contain the parts shown below.
Before assembling the instrument, confirm that all parts are included as listed.
* If a part is missing, please contact your dealer or qualified Yamaha service personnel.
q Owner’s Manual
(this document)
w Main unit × 1 (tone bars, frame, damper,
driver attachment; YV2030MS only)
NOTE
A vibraphone variable-speed driver YVD10 (sold separately) and
an AC adaptor (sold separately) are required for rotating the fans
of the YV2030MS.
t Resonators (natural tone side) × 1
y Resonators (accidental tone side) × 1
u Mallet × 2
i Drop cover × 1
o M8 socket screw × 2, M6 socket screw × 7, cup head
square neck bolt × 1, wing nut × 1 (YV2030MS)
M8 socket screw × 2, M6 socket screw × 6 (YT2030MS)
* These parts (M6 socket screw × 1, cup head square neck bolt,
and wing nut) for the YV2030MS are specifically used for
assembling the vibraphone variable-speed driver YVD10 (sold
separately). Be careful not to lose them.
!0 Hex key × 1
!1 Yamaha representative or the authorized distributor
list x1
e Legs × 2
r Pedal stay × 1