日本語 English VIBRAPHONE VARIABLE-SPEED DRIVER YVD10 Deutsch 取扱説明書 Português Español Français Owner’s Manual Benutzerhandbuch Mode d’emploi Manual de instrucciones Manual do Proprietário JA EN 务请阅读第 3 页“注意事项”。 3 페이지의“안전 주의사항”을 반드시 읽어 주십시오. FR ES PT ZH KO 한국어 『安全上のご注意』(3 ページ ) を必ずお読みください。 Make sure to read the “PRECAUTIONS” on page 3. Lesen Sie unbedingt die “VORSICHTSMASSNAHMEN” auf Seite 3. Assurez-vous de lire “PRÉCAUTIONS D’USAGE” à la page 3. Asegúrese de leer “PRECAUCIONES” en la página 3.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Do not open Power supply/AC adaptor • This product contains no user-serviceable parts.
CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the units or other property. These precautions include, but are not limited to, the following: Handling Transportation and Installation • Treating the controller or driver roughly can damage the internal circuit board, etc. • Keep small parts out of the reach of infants. Your children may accidentally swallow them.
NOTICE • Do not use the units in locations with poor ventilation. • Parts such as switches, volume control, jacks, are called consumable parts and their function will deteriorate over time. The level of deterioration will vary depending upon the conditions under which the units are used. However, deterioration cannot be completely avoided. When replacing consumable parts, please contact your dealer or qualified Yamaha service personnel.
Introduction Thank you for purchasing the Yamaha VIBRAPHONE VARIABLE-SPEED DRIVER YVD10. The VIBRAPHONE VARIABLE-SPEED DRIVER is a motorized drive unit that rotates the fans of the vibraphone. To get full use of this product and enjoy optimal performance, please read this owner’s manual carefully before using the units. After you have read the manual, keep it in a safe and handy place for future reference. Part Names and Functions q POWER switch Turns the power on ( ) and off.
Confirmation of Packing Contents The shipping package of your YVD10 should contain the parts shown below. Before assembling the instrument, confirm that all parts are included as listed. * If a part is missing, please contact your dealer or qualified Yamaha service personnel. q Owner’s Manual (this document) × 1 e Driver × 1 r Fan belt × 2 w Controller × 1 t Yamaha representative or the authorized distributor list × 1 y Legal compliance leaflet × 1 Assembly 1. Attach the controller.
3. Connect the driver and the con- Fan side troller. Connect the driver cable to the driver connection terminal on the controller. Also, align the flat shape of the connector of the cable with the mark printed on the controller. * Be careful not to break the pins of the cable. Controller Pulley Fan belt Driver side V 12 Cable Driver Fan belt 4. Set the fan belt. First, wrap the fan belt around the vibraphone (fan) pulley, and then twist and hook the fan belt on the pulley of the driver.
Power Supply Prepare a separately sold AC adaptor. 1. Connect the DC plug of the AC adaptor to the power jack ( ). 2. Connect the electric plug of the AC adaptor to an outlet. Controller AC adaptor 2 12V 1 AC DC 12V IN * In order to prevent the DC plug from coming out unintentionally, we recommend wrapping the power cord once around the body leg (as shown) before connecting.
Specifications Rated speed: 30–145 RPM Power consumption: 3 W Operating temperature range: 5–40 degrees Celsius Dimensions (W × H × D) Controller: 172 × 67 × 43 mm Driver: 92.8 × 65.5 × 183 mm (excluding the cable; approx. 250 mm) Weight: 0.6 kg (including the fan belt) Included accessories: Fan belt Separately sold accessories (May not be available depending on your area): AC adaptor (PA-130: output DC12V 1.0A, PA-130B: output DC12V 0.7A, PA-150B: output DC12V 1.
雅马哈乐器音响（中国）投资有限公司 上海市静安区新闸路1818号云和大厦2楼 客户服务热线：4000517700 公司网址：http://www.yamaha.com.
