User Manual

19
YVD20 YVD10 Owner’s Manual
4-5.Connect the electric plug of the AC
adaptor to an outlet.
4-6.Turn on the controller power.
The driver returns to its default
position.
4-7.Adjust the position of the fan.
4-7-1. Loosen the wing nut to loosen
the tension of the belt.
4-7-2. In order to position the fan verti-
cally, hold the pulley on the driver
side with one hand (1) so that it
does not move, and then rotate
the pulley on the fan side with
your other hand (2).
4-8.Tighten the wing nut firmly.
 In the case of the YVD10
Prepare the power supply in the same
way as Steps 4-3 to 4-5 (page 18).
The assembly is now complete.
12V
4-4
4-5
Controller
AC adaptor
DC 12V
IN
AC
* In order to prevent the DC plug from
coming out unintentionally, we recom-
mend wrapping the power cord once
around the body leg (as shown) before
connecting.
Perform this setting for both the natural and the
accidental tone side.
Driver side
pulley
Wing nut
 Driver side
 Fan side
Fan side pulley
Resonator
Fan
(1)
(2)
NOTE