User Manual
7
Resonator
holders
x
z
Accidental tone side resonators
Treble side
Bass side
Resonator
holders
z
First,placethetreblesideontothecorresponding
resonatorholders.
x
Toengagethebassside,liftitovertheresonator
holdersandtheninsertitintothegapbetweenthe
twoholders,asshownintheillustration.
Assembly
7.
Attachtheinstrumenttotherack.
Position the instrument on the rack with the bolt
holes (A)locatedonthesideplate of the instru-
ment aligned with the holes (B)ontherackside
frame.
Usingthewashers,springwashers,andknob
headbolts suppliedwith therack, attachthe in-
strumenttotherackfromtheunderside ofthe
rack(fourlocations).
8.
Attachthepedalrodtotheinstrument.
1. Loosenthecenterrodxingboltstoextendthe
centerrod.
2. Connectthecenterrodwith the fittingofthe
rodconnectorbyrmlyholdingthecenterrod
whileturningtherodconnector.
3. Tightenthe rodconnectoruntilit stops,and
thensecurewiththelocknut.
9.
Attachtheresonators.
Insertthe resonatorsfromunderneath the frame
and rest the treble side and then the bass side
ontotheresonatorholders(rubber).
* Make sure not to confuse the natural tone side
and accidental tone side resonators.
* Take care not to bump the resonators against
the legs etc.
Washer
Springwasher
Knob head bolt
B
Instrument
A
Rodconnector
2
Turn(screwon)
3
Secure
Locknut
Centerrodxingbolt
Centerrodxingbolt
1
Loosen
1
Loosen
Centerrod
Pedal rod
Sideplate
Sideframe
Take care not to pinch your ngers when plac-
ing the instrument onto the rack.
CAUTION
02_YVRD2700_E.indd 7 2015/06/08 14:04:37