Service manual
Table Of Contents
- Inroduction
- Yamaha Motor Corporation, USA YZ/WR Motorcycle Limited Warranty
- How to use this Manual
- Index
- Contents
- Chapter 1 General Information
- Chapter 2 Specifications
- Chapter 3 Regular Inspection and Adjustments
- Chapter 4 Engine
- Seat, Fuel Tank and Side Covers
- Exhaust Pipe and Silencer
- Radiator
- Carburetor and Reed Valve
- Cylinder Head, Cylinder and Piston
- Clutch and Primary Driven Gear
- Kick Axle, Shift Shaft and Primary Drive Gear
- YPVS Govenor
- Water Pump
- CDI Magneto
- Engine Removal
- Crankcase and Crankshaft
- Transmission, Shift Cam and Shift Fork
- Chapter 5 Chassis
- Chapter 6 Electrical
- Chapter 7 Tuning
4-18
ENG
CYLINDER HEAD, CYLINDER AND PISTON
EC478100
PISTON AND POWER VALVE
Extent of removal Order Part name Q’ty Remarks
PISTON AND POWER VALVE
REMOVAL
1 Piston pin clip 2
2 Piston pin 1
3 Piston 1 Refer to “REMOVAL POINTS”.
4 Small end bearing 1
5 Piston ring 1
6 Power valve cover 1
7 Thrust plate 1
8 Bolt (link lever) 1
9 Valve holder 1
10 Valve shaft 1
11 Collar 2
12 Link lever 1
13 Spring 2
14 Power valve 1 1
15 Power valve 2 1
Extent of removal: 1
Piston and piston ring removal
2
Power valve removal
2
1
4 Nm (0.4 m•kg, 2.9 ft•lb)
4 Nm (0.4 m•kg, 2.9 ft•lb)
5 Nm (0.5 m•kg, 3.6 ft•lb)
8 Nm (0.8 m•kg, 5.8 ft•lb)
1C3-28199-10 107 04.5.17, 9:22:02 PM