Service manual

5-20
CHAS
FRONT BRAKE AND REAR BRAKE
4. Install:
[Front]
9
Master cylinder kit 1
9
Plain washer 2
9
Circlip 3
9
Master cylinder boot 4
To master cylinder 5.
[Rear]
9
Master cylinder kit 1
9
Push rod 2
9
Circlip 3
9
Master cylinder boot 4
To master cylinder 5.
NOTE:
9
Apply the brake fluid on the master cylinder
kit.
9
Apply the lithium soap base grease on the tip
of the push rod.
9
When installing the circlip, use a long nose
circlip pliers.
A Front
B Rear
EC5A5310
Front master cylinder
1. Install:
9
Master cylinder 1
9
Master cylinder bracket 2
9
Bolt (master cylinder bracket) 3
NOTE:
9
Install the bracket so that the arrow mark a
face upward.
9
First tighten the bolts on the upper side of the
master cylinder bracket, and then tighten the
bolts on the lower side.
9 Nm (0.9 m•kg, 6.5 ft•lb)
2. Install:
9
Brake lever 1
9
Bolt (brake lever) 2
9
Nut (brake lever) 3
NOTE:
Apply the lithium soap base grease on the
brake lever sliding surface, bolt and contacting
surface of the master cylinder piston.
6 Nm (0.6 m•kg, 4.3 ft•lb)
6 Nm (0.6 m•kg, 4.3 ft•lb)
1C3-28199-10 183 04.5.17, 9:26:21 PM