Service manual
Table Of Contents
- Inroduction
- Yamaha Motor Corporation, USA YZ/WR Motorcycle Limited Warranty
- How to use this Manual
- Index
- Contents
- Chapter 1 General Information
- Chapter 2 Specifications
- Chapter 3 Regular Inspection and Adjustments
- Chapter 4 Engine
- Seat, Fuel Tank and Side Covers
- Exhaust Pipe and Silencer
- Radiator
- Carburetor and Reed Valve
- Cylinder Head, Cylinder and Piston
- Clutch and Primary Driven Gear
- Kick Axle, Shift Shaft and Primary Drive Gear
- YPVS Govenor
- Water Pump
- CDI Magneto
- Engine Removal
- Crankcase and Crankshaft
- Transmission, Shift Cam and Shift Fork
- Chapter 5 Chassis
- Chapter 6 Electrical
- Chapter 7 Tuning
5-35
CHAS
FRONT FORK
14. Install:
9
Dust seal 1
9
Stopper ring 2
9
Oil seal 3
9
Oil seal washer 4
9
Slide metal 5
To inner tube 6.
NOTE:
9
Apply the fork oil on the inner tube.
9
When installing the oil seal, use vinyl seat a
with fork oil applied to protect the oil seal lip.
9
Install the oil seal with its manufacture's marks
or number facing the axle holder side.
9
Install the oil seal washer with its projections b
facing upward.
15. Install:
9
Piston metal 1
NOTE:
Install the piston metal onto the slot on inner
tube.
16. Install:
9
Outer tube 1
To inner tube 2.
1C3-28199-10 198 04.5.17, 9:27:28 PM