Service manual

2-5
SPEC
MAINTENANCE SPECIFICATIONS
Part to be tightened Thread size Q'ty
Tightening torque
Nm m•kg ft•lb
Spark plug
M14S × 1.25 1 20 2.0 14
Cylinder head (nut) M 8 × 1.25 5 28 2.8 20
(stud) M 8 × 1.25 5 13 1.3 9.4
Cylinder (nut) M 8 × 1.25 4 30 3.0 22
(stud) M10 × 1.25 4 13 1.3 9.4
Power valve:
Cover M 5 × 0.8 4 5 0.5 3.6
Link lever M 4 × 0.7 1 4 0.4 2.9
Holder (power valve) M 5 × 0.8 4 8 0.8 5.8
Push rod M 5 × 0.8 1 5 0.5 3.6
Thrust plate M 5 × 0.8 1 4 0.4 2.9
Governor fork M 4 × 0.7 2 5 0.5 3.6
Housing M 5 × 0.8 3 4 0.4 2.9
Water pump housing cover M 6 × 1.0 4 10 1.0 7.2
Coolant drain bolt M 6 × 1.0 1 10 1.0 7.2
Radiator M 6 × 1.0 6 10 1.0 7.2
Radiator panel M 6 × 1.0 2 10 1.0 7.2
Radiator hose clamp M 6 × 1.0 8 1 0.1 0.7
Air filter element M 6 × 1.0 1 2 0.2 1.4
Carburetor joint M 6 × 1.0 4 10 1.0 7.2
Carburetor joint clamp M 4 × 0.7 1 2 0.2 1.4
Air filter joint clamp M 4 × 0.7 1 2 0.2 1.4
Air filter case M 6 × 1.0 4 8 0.8 5.8
Air filter guide clamp M 5 × 0.8 1 4 0.4 2.9
Read valve M 3 × 0.5 6 1 0.1 0.7
Throttle cable adjust bolt and locknut M 8 × 1.25 1 7 0.7 5.1
Throttle cable M 6 × 0.75 1 4 0.4 2.9
Crankcase M 6 × 1.0 12 14 1.4 10
Crankcase cover (right) M 6 × 1.0 8 10 1.0 7.2
Crankcase cover (left) M 6 × 1.0 4 5 0.5 3.6
Chain cover M 6 × 1.0 2 5 0.5 3.6
Bearing plate cover M 6 × 1.0 4 10 1.0 7.2
Holder M 6 × 1.0 1 10 1.0 7.2
Oil check bolt M 6 × 1.0 1 10 1.0 7.2
Oil drain bolt M10 × 1.25 1 20 2.0 14
Kick starter M 6 × 1.0 1 10 1.0 7.2
Cluch cover M 6 × 1.0 6 10 1.0 7.2
Primary drive gear M 8 × 1.25 1 48 4.8 35
Clutch boss M16 × 1.0 1 80 8.0 58
Clutch spring M 6 × 1.0 5 10 1.0 7.2
Clutch cable adjust bolt and locknut M 6 × 0.75 1 4 0.4 2.9
Drive sprocket M18 × 1.0 1 75 7.5 54
Shift pedal M 6 × 1.0 1 12 1.2 8.7
Bearing plate cover (shift cam) M 6 × 1.0 2 10 1.0 7.2
Shift guide M 6 × 1.0 2 10 1.0 7.2
Stopper lever M 6 × 1.0 1 10 1.0 7.2
Segment M 8 × 1.25 1 30 3.0 22
▲▲
1C3-28199-10 37 04.5.17, 9:19:34 PM