Service manual

3-40
IGNITION TIMING CHECK
INSP
ADJ
7. Adjust:
9
Ignition timing
Adjustment steps:
9
Loosen the screws (stator) 1.
9
Align the punch mark on the rotor with
punch mark on the stator 2 by moving the
stator.
9
Tighten the screws (stator).
Screw (stator):
7 Nm (0.7 m•kg, 5.1 ft•lb)
1C3-28199-10 89 04.5.17, 9:21:16 PM