Service manual
Table Of Contents
- Inroduction
- Yamaha Motor Corporation, USA YZ/WR Motorcycle Limited Warranty
- How to use this Manual
- Index
- Contents
- Chapter 1 General Information
- Chapter 2 Specifications
- Chapter 3 Regular Inspection and Adjustments
- Chapter 4 Engine
- Seat, Fuel Tank and Side Covers
- Exhaust Pipe and Silencer
- Radiator
- Carburetor and Reed Valve
- Cylinder Head, Cylinder and Piston
- Clutch and Primary Driven Gear
- Kick Axle, Shift Shaft and Primary Drive Gear
- YPVS Govenor
- Water Pump
- CDI Magneto
- Engine Removal
- Crankcase and Crankshaft
- Transmission, Shift Cam and Shift Fork
- Chapter 5 Chassis
- Chapter 6 Electrical
- Chapter 7 Tuning
![](/manual/yamaha/yz125t1/service-manual-english/images/img-95.png)
4-6
ENG
RADIATOR
EC455000
ASSEMBLY AND INSTALLATION
EC445344
Radiator
1. Install:
9
Radiator breather hose 1
9
Radiator hose 3 2
9
Radiator hose 1 3
To radiator (right) 4.
NOTE:
Clamp the radiator hose in the direction as
shown.
2. Install:
9
Radiator (right) 1
9
Plain washer 2
9
Bolt [radiator (right)] 3
9
Radiator hose 4 4
Refer to “CABLE ROUTING DIAGRAM”
section in the CHAPTER 2.
3. Install:
9
Radiator (left) 1
9
Plain washer 2
9
Bolt [radiator (left)] 3
9
Radiator hose 2 4
Refer to “CABLE ROUTING DIAGRAM”
section in the CHAPTER 2.
4. Tighten:
9
Clamp (radiator hose 1, 3) 5
5. Install:
9
Panel 1
9
Bolt (panel) 2
NOTE:
Fit the hook a on the inner side first into the
radiator.
1 Nm (0.1 m•kg, 0.7 ft•lb)
1 Nm (0.1 m•kg, 0.7 ft•lb)
1 Nm (0.1 m•kg, 0.7 ft•lb)
1 Nm (0.1 m•kg, 0.7 ft•lb)
1 Nm (0.1 m•kg, 0.7 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
1C3-28199-10 95 04.5.17, 9:21:31 PM