Service manual

4-34
CLUTCH AND PRIMARY DRIVEN GEAR
ENG
Extent of removal Order Part name Q’ty Remarks
PRIMARY DRIVEN GEAR, PUSH
ROD AND PUSH LEVER AXLE
REMOVAL
1 Push rod 1 1
2 Circlip 1
3 Plain washer 1
4
Bearing 1
5 Push rod 2 1
6 Nut (clutch boss) 1
Use special tool.
7
Lock washer 1
Refer to “REMOVAL POINTS”.
8 Clutch boss 1
9
Thrust plate [D=ø44mm (1.73 in)] 1
10 Primary driven gear 1
11 Bearing 1
12
Thrust plate [D=ø42mm (1.65 in)] 1
13 Bolt (push lever axle) 1
14 Push lever axle 1
EC498200
PRIMARY DRIVEN GEAR, PUSH ROD AND PUSH LEVER AXLE
Extent of removal: 1 Push rod and push lever axle removal 2 Push rod 1 disassembly
3 Primary driven gear removal
2
3
1
1
1





3
75 Nm (7.5 m•kg, 54 ft•lb)
6 Nm (0.6 m•kg, 4.3 ft•lb)
1P8-28199-10 124 04.5.12, 7:43:38 PM