Service manual

4-37
CLUTCH AND PRIMARY DRIVEN GEAR
ENG
EC495230
Clutch
1. Install:
9
Thrust plate [D=ø 42 mm (1.65 in)] 1
9
Spacer 2
9
Bearing 3
9
Primary driven gear 4
NOTE:
Apply the transmission oil on the bearing, spacer
and primary driven gear inner circumference.
2. Install:
9
Thrust plate [D=ø 44 mm (1.73 in)] 1
9
Clutch boss 2
3. Install:
9
Lock washer 1
9
Nut (clutch boss) 2
NOTE:
Use the clutch holding tool 3, 4 to hold the
clutch boss.
å For USA and CDN
∫ Except for USA and CDN
4. Bend the lock washer 1 tab.
75 Nm (7.5 m•kg, 54 ft•lb)
Clutch holding tool:
YM-91042 ..............................
3
90890-04086..........................
4
å
∫
1P8-28199-10 127 04.5.12, 7:43:47 PM