Service manual

4-70
CRANKCASE AND CRANKSHAFT
ENG
3. Install:
9
O-ring 1
To crankcase (right) 2.
5. Install:
9
Dowel pin 1
9
Crankcase (right) 2
To crankcase (left) 3.
NOTE:
9
Fit the crankcase (right) onto the crankcase
(left). Tap lightly on the case with soft hammer.
9
When installing the crankcase, the connecting
rod should be positioned at TDC (top dead
center).
cC
In order to prevent the oil seal lip
a
from
being turned up or damaged, wrap a vinyl
tape or the like
b
around the right end of
the crankshaft and apply the lithium soap
base grease over the tape.
NOTE:
Clean the contacting surface of crankcase (left
and right) before applying the sealant.
4. Apply:
9
Sealant
On the crankcase (right) 1.
Quick gasket
®
:
ACC-QUICK-GS-KT
Yamaha bond No. 1215:
90890-85505
1P8-28199-10 160 04.5.12, 7:45:36 PM