Service manual

5-40
CHAS
FRONT FORK
6. Adjust:
9
Rebound damping force
NOTE:
Turn in the damping adjuster 1 finger-tight and
then turn out to the originally set position.
5. Install:
9
Protector 1
9
Bolt (protector) 2
10 Nm (1.0 m•kg, 7.2 ft•lb)
3. Adjust:
9
Front fork top end a
Front fork top end (standard)
a
:
Zero mm (Zero in)
4. Tighten:
9
Pinch bolt (handle crown) 1
9
Pinch bolt (under bracket) 2
cC
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
23 Nm (2.3 m•kg, 17 ft•lb)
20 Nm (2.0 m•kg, 14 ft•lb)
7. Adjust:
9
Compression damping force
NOTE:
Turn in the damping adjuster 1 finger-tight and
then turn out to the originally set position.
1P8-28199-10 206 04.5.12, 7:48:46 PM