Service manual

6-7
SOLENOID VALVE SYSTEM
ELEC
Check solenoid
valve operation.
Solenoid valve
coil
No good
No good
Check each couplers and
wire connection.
Check solenoid valve.
Repair or replace.
Replace.
Replace.
OK
OK
OK
Source coil
No good
Replace.
* Check CDI magneto.
Replace CDI unit.
No good
EC650001
SOLENOID VALVE SYSTEM
EC651032
INSPECTION STEPS
If the solenoid valve will not operate, use the following inspection steps.
* marked: Refer to "IGNITION SYSTEM" section.
NOTE:
9
Remove the following parts before inspection.
1) Seat
2) Fuel tank
9
Use l2V battery in this inspection.
9
Use the following special tools in this inspection.
Pocket tester:
YU-3112-C/90890-03112
1P8-28199-10 239 04.5.12, 7:51:18 PM