Service manual

2-2
GENERAL SPECIFICATIONS
SPEC
Carburetor:
Type/Manufacturer PWK38S/KEIHIN
Spark plug:
Type/Manufacturer BR8EG/NGK (resistance type)
Gap 0.5~0.6 mm (0.020~0.024 in)
Clutch type: Wet, multiple-disc
Transmission: USA, ZA, AUS, NZ EUROPE, CDN
Primary reduction system Gear ←
Primary reduction ratio 63/21 (3.000) ←
Secondary reduction system Chain drive ←
Secondary reduction ratio 50/14 (3.571) 49/14 (3.500)
Transmission type Constant mesh, ←
5-speed
Operation Left foot operation ←
Gear ratio: 1st 27/14 (1.929) ←
2nd 23/15 (1.533) ←
3rd 23/18 (1.278) ←
4th 24/22 (1.091) ←
5th 20/21 (0.952) ←
Chassis: USA, ZA, AUS, NZ EUROPE CDN
Frame type Semi double ←←
cradle
Caster angle 26.9° 27.0° 26.9°
Trail 115 mm (4.53 in) 117 mm (4.61 in) 116 mm (4.57 in)
Tire:
Type With tube
Size (front) 80/100-21 51M
Size (rear) 110/90-19 62M
Tire pressure (front and rear) 100 kPa (1.0 kgf/cm
2
, 15 psi)
Brake:
Front brake type Single disc brake
Operation Right hand operation
Rear brake type Single disc brake
Operation Right foot operation
Suspension:
Front suspension Telescopic fork
Rear suspension Swingarm (link type monocross suspension)
Shock absorber:
Front shock absorber Coil spring/oil damper
Rear shock absorber Coil spring/Gas, oil damper
Wheel travel:
Front wheel travel 300 mm (11.8 in)
Rear wheel travel 315 mm (12.4 in)
Electrical:
Ignition system CDI magneto
1P8-28199-10 34 04.5.12, 7:40:26 PM