Service manual

2-17
CABLE ROUTING DIAGRAM
SPEC
1 Master cylinder
2 Brake hose holder
3 Brake hose
A Install the brake hose so that its pipe portion
directs as shown and lightly touches the projec-
tion on the caliper.
B Pass the brake hose into the brake hose
holders.
C If the brake hose contacts the spring (rear
shock absorber), correct its twist.
D Install the brake hose so that its pipe portion
directs as shown and lightly touches the
projection on the master cylinder.
1P8-28199-10 49 04.5.12, 7:40:46 PM