Service manual

INSP
ADJ
3-6
COOLANT REPLACEMENT
cC
Take care so that coolant does not splash
on painted surfaces. If it splashes, wash it
away with water.
1. Place a container under the engine.
2. Remove:
9
Coolant drain bolt 1
3. Remove:
9
Radiator cap
Drain the coolant completely.
4. Clean:
9
Cooling system
Thoroughly flush the cooling system with
clean tap water.
5. Install:
9
Copper washer
9
Coolant drain bolt
6. Fill:
9
Radiator
9
Engine
To specified level.
Recommended coolant:
High quality ethylene glycol
anti-freeze containing
anti-corrosion for
aluminum engine
Coolant 1 and water
(soft water) 2 mixing ratio:
50%/50%
Coolant capacity:
1.20 L (1.06 Imp qt, 1.27 US qt)
10 Nm (1.0 m•kg, 7.2 ft•lb)
1P8-28199-10 56 04.5.12, 7:40:56 PM