Service manual

CHAS
4-49
1. Install:
• damper rod assembly
• inner tube
CAUTION:
Allow the damper rod assembly to slide
slowly down the inner tube until it pro-
trudes from the bottom of the inner tube.
Be careful not to damage the inner tube.
2. Install:
•gasket
• base valve
3. Tighten:
• base valve
LOCTITE
®
N
O
TE:N
O
TE:
While holding the damper rod with the
damper rod holder , tighten the base valve.
4. Lubricate:
• inner tube’s outer surface
5. Install:
• spring guide
•nut
N
O
TE:N
O
TE:
Install the spring guide with its cut facing
downward.
55 Nm (5.5 m•kg, 40 ft•lb)
Damper rod holder
90890-01454, YM-01454
Recommended lubricant
Suspension oil “01”
FRONT FORK